Wraps, part wraps and lettering for the vans, lorries and minibuses your business runs around Soham.
Each design is drawn up and printed in-house, so you deal with one business from the first sketch to the fitting.
Soham is a fenland town in East Cambridgeshire, and many local businesses run commercial vehicles across the surrounding flat, open countryside. Vehicles here cover long distances across the fens to reach customers, which means every mile is an opportunity for brand visibility. Van Wrapping Cambridge comes to you in Soham to carry out signwriting and wrap installations on site, with all design and print handled in-house.
We work with businesses of all sizes, from sole traders to multi-vehicle fleets.
Soham lies in the flat fenland of East Cambridgeshire.
In Soham and the surrounding fenland, most businesses rely on vehicles. Covering the flat, open terrain between towns and farms means vans, pickups and lorries are on the road constantly. That is a lot of daily exposure to other road users, and a signed vehicle in that environment is reaching a genuinely local audience - the same people who are potential customers for the trades and services that make up much of the local economy.
We come to you in Soham. You do not need to arrange transport to a workshop in Cambridge or anywhere else. We carry out the installation at your premises, your yard or your business address, working around your schedule and your vehicles' availability. Design and print are handled in-house from the outset, so there is no third party involved in producing your graphics.
Agricultural contractors, builders, plumbers, electricians, groundworkers, drainage companies, pest controllers and delivery operators all run vehicles from the Soham area. The common thread is that their vans and trucks are their primary point of contact with the public - often the first thing a potential customer sees before they ever visit a website or look up a review.
A professionally wrapped van signals that a business is established and takes itself seriously. In a competitive local market, that matters. It also makes a business memorable. When someone in a fenland village needs a plumber or a groundworker and they have been seeing the same well-branded van in the area for months, that recognition translates directly into calls.
There are three main approaches, each suited to different budgets and requirements.
For agricultural and groundwork businesses with heavy-duty vehicles, partial wraps and cut vinyl are common choices because they are more practical for vehicles that take a lot of physical punishment. A tractor or a tipper truck does not need a full colour-change wrap - a clear, legible set of graphics does the job well.
Vehicles working on and around farms in the Soham area often carry a lot of mud and dust, and the graphics need to remain legible even when the vehicle is not freshly washed. High-contrast designs - white or yellow on dark backgrounds, or dark text on light vehicle colours - remain readable in most conditions. Overly complex designs with thin lines and small text suffer more from dirt and weathering.
We design with the specific vehicle in mind, using accurate templates for the make and model so that text and graphics land on flat panel surfaces rather than across body creases or over rivets. That sounds basic, but it is a step that makes a significant difference to the final result.
All design and print work is done in-house. That means your design is created, proofed, printed and checked by one team before anyone arrives at your site. It also means colour is consistent from one print run to the next - important when you are adding vehicles to a fleet over time and need each one to match the previous ones.
If you have existing branding - a logo file, a colour code, a style guide - send it over and we work from it. If you are starting from scratch and need a design created for a new business or a rebrand, we do that too. We will show you a visual of how the graphics will look on your specific vehicle before anything is printed.
Running a fleet of two or more vehicles raises the question of consistency. Graphics need to look the same across different vehicle sizes and models, and they need to be reproduced accurately when a vehicle is replaced or damaged. A common problem is that businesses use different signwriters at different times and end up with a fleet that looks like it belongs to three different companies.
Keeping your design and print in one place - with us - means that every vehicle in your fleet is produced to the same specification. We adapt the layout as needed for different vehicle sizes, maintaining the same visual identity across all of them. When you need a replacement panel after a repair, or a new vehicle signed up, we match the existing work accurately.
Wrap removal is something businesses need when selling a vehicle, returning a lease, or rebranding. It is a job that takes time and care. The film is heated to soften the adhesive and then peeled back methodically, working in sections. Adhesive residue is cleaned off after removal. On a vehicle in decent condition with a wrap that has been on for a reasonable number of years, the paintwork should be unaffected.
Attempting to remove a wrap without heat, or by pulling it quickly, risks lifting paint - particularly on vehicles where the original paint was not in top condition before the wrap went on. We carry out removal properly and can advise on condition before starting if you have concerns about the paint underneath.
We offer removal as a standalone service or combined with new graphics if you are rebranding. If you are unsure whether a vehicle is worth rebranding or should be sold as-is, we can give you an honest view on the condition and likely cost involved.
We travel from Cambridge and work across East Cambridgeshire and beyond, so the distance from our base does not affect what we can offer here.
Call us to describe your vehicles and what you are after. We will tell you which approach suits your situation and what it is likely to cost, without any commitment on your part. If you are ready to get a quote, give us a ring and we will take it from there.
What condition does the vehicle need to be in? It should be clean and free of wax or polish on the panels being wrapped. Surface scratches are generally not a problem. Deep dents, rust or flaking paint are, because vinyl film will not adhere properly to those areas and will lift over time. We will assess the vehicle on arrival and flag anything that might affect the result.
How long does installation take? Installation time depends on the vehicle and the type of wrap. Larger, full-coverage jobs take longer than partial wraps or cut vinyl. We will give you a realistic time estimate when we discuss the job.
Can you do agricultural or specialist vehicles? Yes. We work on vans, pickups, flatbeds and other commercial vehicles. If you have something unusual, give us a call and we will talk through what is involved.
What we do here
We design, print and fit full or partial van wraps in Cambridge, working at your premises so your vehicle never leaves your site.
See detailsWe wrap commercial vehicles of all types in Cambridge, designing and printing everything in-house and fitting at your site.
See detailsWe brand entire fleets of commercial vehicles in Cambridge with consistent, professionally printed graphics, designing and fitting everything…
See detailsA full van wrap transforms your entire vehicle into a moving advertisement for your business.
See detailsA part wrap covers specific panels or sections of your van rather than the whole vehicle.
See detailsVan signwriting applies cut vinyl lettering and graphics directly to your vehicle's paintwork.
See detailsVan graphics designed, printed and fitted in Cambridge.
See detailsVehicle graphics for cars, vans, trucks and trailers across Cambridge, designed and printed in-house, with fitting carried out at your location.
See detailsWe work at your depot or yard, handling everything in-house from the initial design to fitting on curtainsiders, box bodies and artics.
See detailsFull minibus graphics designed, printed and fitted by our team - at your premises across Cambridge.
See detailsNearby
Send the form or ring us with your vehicle details and we will take it from there.