We wrap commercial vehicles of all types in Cambridge, designing and printing everything in-house and fitting at your site. From small vans to larger panel vehicles, we turn your fleet into branded advertising that works every day.
Commercial vehicle wrapping is the process of applying printed vinyl film to the bodywork of a work vehicle to display your business name, logo, contact details and any other branding. It applies to any vehicle used for work purposes: panel vans, luton vans, pickup trucks, minibuses, trailers, box bodies and refrigerated units. If it has a painted or smooth-surfaced body, it can almost certainly be wrapped.
Businesses in Cambridge and the surrounding area use vehicle wraps because they deliver advertising exposure without an ongoing monthly spend. Unlike paid digital ads or printed directories, a wrapped commercial vehicle keeps generating impressions for as long as it is on the road.
Most commercial vehicle bodies are suitable for wrapping. The main variables are surface condition and panel construction. Vehicles with significant rust, deep dents, peeling factory paint or heavily textured surfaces may not be suitable without preparation work first. We will tell you honestly at the quoting stage whether a vehicle needs attention before wrapping.
Heavily riveted or corrugated panel sides, such as those found on some older box trailers, limit what film can be applied and how cleanly it sits. We can usually still apply cut vinyl graphics to these surfaces even where full printed wraps are not practical.
We design and print everything in-house. That means we control the quality at every stage rather than outsourcing print to a third party and hoping the colours match the design file. We use wide-format printers with UV-resistant inks and laminate the finished print to protect it from fuel, cleaning chemicals and road grime.
Templating is an important part of the process for commercial vehicles. Vans from the same manufacturer in the same model range can have different panel sizes depending on roof height, wheelbase and body variant. We work from accurate templates rather than generic outlines so the artwork fits properly around handles, hinges, lights, side-loading doors and any other features specific to your vehicle.
Fitting is done at your premises. We come to you with everything needed to complete the job on-site. The vehicle should be clean and dry, and ideally parked indoors or under cover. Cold or wet weather slows the fitting process and can affect adhesion, so we will work with you to find a suitable time and location, particularly in autumn and winter when Cambridge mornings can be cold.
Commercial vehicles are working assets. A poorly fitted wrap that lifts at the edges, bubbles over panel seams or fades unevenly reflects badly on the business displayed on the side of that vehicle. Poor results usually come from one of three causes: inferior film, bad printing or inexperienced fitting. Using a cast-grade film printed at proper resolution, laminated and fitted by someone who knows how to handle compound curves and door recesses, produces a noticeably different result.
A common problem is wrap film applied without proper surface preparation. Any contamination left on the panel, including wax, silicone polish, grease or traffic film, will cause the adhesive to fail prematurely.
A full wrap on a standard medium-wheelbase panel van in Cambridge typically costs between £1,500 and £2,500. Larger or more complex vehicles such as long-wheelbase high-roof vans or luton bodies sit higher, often in the £2,500 to £4,000 range depending on the amount of film and the complexity of the design. Partial wraps and cut vinyl graphics are available at lower price points. Each job is priced individually because vehicle sizes and design requirements vary considerably.
We remove existing wraps as well as fit new ones. If you are rebranding, taking a vehicle off fleet or selling it on, we can strip the old graphics cleanly using heat and specialist tools. Done properly, removal leaves the original paint intact. We also offer removal as a standalone service if you had a wrap fitted elsewhere and need it taken off.
Send us clear photos of the vehicle from each side, tell us what you want to display and we will give you a straightforward price. If you have an existing logo and brand colours, send those across too. Call us to discuss your vehicle and your requirements.
Also available
We design, print and fit full or partial van wraps in Cambridge, working at your premises so your vehicle never leaves your site.
See detailsWe brand entire fleets of commercial vehicles in Cambridge with consistent, professionally printed graphics, designing and fitting everything…
See detailsA full van wrap transforms your entire vehicle into a moving advertisement for your business.
See detailsQuestions
Phone us, or use the enquiry form to list your vehicle types and how many there are, and a written price will follow.