Covering Cambridge and the surrounding area Monday to Friday 9:00am - 5:00pm Get a quote

Van Wrapping in Soham - What to Do While You Wait (and What to Leave Alone)

If you are waiting for a van wrap booking in Soham, or your van has picked up some wrap damage and you are waiting for a repair, here is what you can do in the meantime - and what you should not attempt yourself.

5.0 from 9 Google reviews Est. 2020 A written quote up front Mock-up on your vehicle type first We bring the fitting to you

What Van Wrapping Involves

A van wrap is a printed vinyl film applied by hand over your vehicle's existing paintwork. The process covers the original paint completely, displays your brand, colours and contact details, and - when done properly - protects the surface beneath. The film can be removed cleanly when you sell the van or change your branding. It is not a paint job, so it does not involve spraying, curing in a booth or any of the drying time associated with vehicle respray work.

We design and print in-house and travel to customers to carry out the fitting. That means the work happens at your location in Soham - your yard, depot or driveway - rather than you needing to drop the van somewhere and collect it later.

While You Are Waiting for a Booking: Prepare the Van

There is a reasonable amount you can do between booking a wrap and the fitting date that makes the job go better and reduces the chance of complications on the day.

Give the van a thorough clean

The single most useful thing you can do is wash the van properly. Vinyl film will not adhere well to a surface that has wax, polish, silicone, road grime, oil or any other contaminant on it. A clean vehicle at the start of the job means less preparation time on the day and a better bond between film and paint.

Use a degreasing vehicle shampoo and rinse thoroughly. Avoid applying any fresh wax or polish in the days before the fitting - it will only need to be removed again. If the van has had a commercial vehicle wash recently with a wax additive, mention this when you call.

Check the paintwork and flag any issues

Walk around the van in decent light and look for flaking paint, rust spots, deep scratches down to bare metal, or areas where a previous respray has started to peel. These need to be mentioned before the wrap goes on. Film applied over failing paint will lift sooner, and in some cases a wrap is not the right solution until the bodywork is sorted first.

Minor stone chips and light surface scratches are generally fine - the wrap will cover them. It is the structural paint failures that matter.

Think about your design

Use the waiting time to firm up your design brief. Consider: what information does the wrap need to carry? Business name, phone number, website address and a one-line description of your trade are the standard elements. Think about your brand colours - if you have a logo, have the file ready in a vector format (AI, EPS or high-resolution PDF) so it can be used for print without quality loss.

If you do not have a logo or brand identity yet, that is a conversation to have early - not on the morning of the fitting.

Decide on coverage

Full wraps cover every painted panel on the vehicle. Partial wraps cover specific areas only - typically the sides and rear. A simple cut vinyl application places individual lettering and graphics directly on the van without a full printed background. Each has a different cost and a different visual result. Knowing roughly what you want before the design stage saves time.

A full wrap on a medium-wheelbase van typically runs from around £1,200 to £2,500. A partial wrap or cut vinyl job on the same vehicle costs less, depending on what is covered and how complex the design is. These are typical UK market figures - ask for a specific quote for your vehicle.

If Your Existing Wrap Is Damaged: What to Do While You Wait for a Repair

If you have an existing wrap that has been damaged and you are waiting for a professional to attend, there are a few things you can and cannot do in the meantime.

What you can do

  • Keep the damaged area clean and dry
  • If a small corner of edge has lifted, press it flat firmly with a clean finger and hold for thirty seconds - this can re-activate the adhesive temporarily and stop it catching wind
  • Cover a damaged section with a clean, non-adhesive cloth if the van is parked and exposed to weather - this keeps grit and water out of a lifted edge
  • Photograph the damage clearly so you can send images to your installer before they arrive - it helps them bring the right materials

What not to do yourself

This is where most avoidable mistakes happen. When a wrap starts to lift or tear, the temptation is to do something - but the wrong action makes the professional repair harder and more expensive.

  • Do not use household adhesive, superglue or any tape on the film surface - these leave residue that damages the film and the paint beneath, and they are extremely difficult to remove cleanly
  • Do not try to re-stretch or re-apply a section of lifted film using a hair dryer - without the proper technique and tools, you will crease or shrink the film and ruin the panel
  • Do not attempt to trim away a damaged section with a blade - cutting into wrap film risks scoring the paint underneath, particularly on flat panel areas
  • Do not apply polish or wax to stabilise an edge - it will prevent re-adhesion when the professional attends
  • Do not run the van through a brush car wash if there is any significant edge lift - the brushes will catch the edge and strip a much larger section

What Not to Attempt on Your Own Before the Wrap

Some van owners decide to do some bodywork preparation themselves before a wrap is fitted. Some of this is helpful; some of it creates problems.

Washing, degreasing and clearing the van of tools and equipment inside are all useful. Attempting your own paint repair using rattle-can aerosol paint is not recommended - aerosol resprays use a different paint chemistry to the original factory finish, and the texture difference can cause adhesion problems under the wrap at the edges of the repair. If the van genuinely needs bodywork, have it done by a bodyshop first, then book the wrap once the paint has fully cured - typically at least two weeks.

Similarly, do not attempt to strip an old wrap yourself in advance of a new fitting. Wrap removal looks straightforward but done poorly it pulls paint off or leaves adhesive residue that must be fully removed before anything new can go on. We carry out wrap removal as part of our service - it is included in the conversation when you book.

On the Day of the Fitting

The installer will need reasonable space to work around all sides of the vehicle. A clean, ideally covered area - a garage, barn or large yard with no overhanging trees - makes the job easier. Wind, rain and direct strong sunlight can all affect the fitting process. If the weather is likely to be a problem on the day, it is worth having a conversation about timing or location before the team arrives.

Have the van empty of tools and cleared of loose equipment in the load area. Access to a power point is useful if the installer needs a heat gun - check that one is available at your site.

Get Booked In

We serve Soham and the surrounding area from our Cambridge base. We travel to your location, and we design and print in-house - so there is no third party involved between your brief and the finished wrap on your van. Call us to talk through your vehicle, your design and when works for you.

Working with us in Soham

  • Design and print both done by us, not sent out.
  • Old lettering or wraps removed first, if needed.
  • Fleet work in Soham split into stages.
  • Artwork stored, ready for your next vehicle.

Van Wrapping in Soham?

Let us know what needs branding and we will send a design and price to look over.

Call Quote