Covering Cambridge and the surrounding area Monday to Friday 9:00am - 5:00pm Get a quote

Fleet Wrapping and Branding in Soham - What to Do While You Wait

If you've booked fleet wrapping for your Soham vehicles and you're waiting for the job to be scheduled, there's useful preparation you can do now - and a few things you should definitely leave alone.

5.0 from 9 Google reviews Est. 2020 A written quote up front Mock-up on your vehicle type first We bring the fitting to you

Fleet Wrapping and Branding - What the Job Involves

Fleet wrapping puts a consistent branded appearance across every vehicle you operate - same colours, same logo, same layout on every van. It's done by applying vinyl film, either as a full wrap that covers the whole vehicle or as a partial wrap and spot graphics that add branding to specific panels.

We handle design and print in-house and travel to your premises to carry out the installation, so your vehicles don't need to leave your site. For fleet customers in and around Soham, that means minimal disruption to your operation.

Why There's Usually a Lead Time

Fleet wrapping isn't a job that happens overnight. Design needs to be agreed, artwork prepared and proofed, materials ordered and printed, and installation scheduled around your operation.

It helps to allow some time between artwork sign-off and the start of installation. That gap is not dead time - there's preparation you can do that will directly affect how well the finished job looks and how quickly the installation goes.

How to Prepare Your Vehicles Before the Fitter Arrives

The single most important thing you can do is make sure the vehicles are clean. Vinyl film will not bond properly to a surface that has road grime, wax, polish, grease or silicone on it. The fitter will clean the surface before applying the wrap, but if a vehicle arrives heavily contaminated - particularly with wax or silicone from recent valeting - it takes considerably longer to prepare and can in some cases affect the result.

Wash each vehicle thoroughly with a mild shampoo a day or two before the scheduled session. If your vans have recently been through a valet that involved waxing, let the fitter know in advance so they can allow extra preparation time.

Also check for any existing bodywork damage - dents, deep scratches or rust spots - on panels that are going to be wrapped. Vinyl film follows the surface it's applied to: a dent doesn't disappear under a wrap, it telegraphs through the film and is often more visible than it was on bare paint. Minor stone chips are usually fine. Anything deeper than a surface scratch is worth getting looked at before the wrap goes on.

Sort Out Your Artwork and Branding Before You're Asked

If you have an existing logo, make sure you can supply it as a vector file (AI, EPS or SVG format). A logo supplied as a small JPEG or PNG from a website will not print cleanly at van scale. If your only version of your logo is a low-resolution image, tell us at the design stage and we can redraw it from scratch as part of the job - but it's faster and cheaper if you have the original files.

Gather everything you want on the vans before the design brief stage:

  • Your trading name, exactly as you want it to appear
  • Phone number and website address to display
  • Any tagline or strapline you use
  • Your brand colours, ideally as Pantone or CMYK references - if you only know them from a previous printer, bring a physical sample and we'll match from that
  • Any specific layouts you've seen on other vans that you like or want to avoid

Having all of this ready when the design brief starts saves a round of revisions and shortens the time to artwork approval.

What Not to Do Yourself

It's tempting to try to get ahead of the job by doing some preparation work yourself. Most of the time this causes more problems than it solves. Specifically:

  • Don't apply any new polish, wax or paint sealant to the vehicles. These products leave residues that interfere with vinyl adhesion. Even spray-on tyre dressings that drift onto painted panels can cause problems. If the vehicles have been treated with any of these products recently, tell us and we'll adjust preparation accordingly.
  • Don't attempt to remove existing graphics or stickers yourself. Old vinyl, decals and stickers need to be removed at the right temperature and speed to avoid leaving adhesive residue or lifting paint. Using a scraper or solvent without experience risks damaging the paint surface that the new wrap needs to bond to. Removal is a service we offer and carry out at your location.
  • Don't apply any touch-up paint to the panels being wrapped. Fresh or incompletely cured paint can react with vinyl adhesive. If paint repairs are needed, they should be done professionally and allowed to cure fully - typically at least four weeks - before wrapping.
  • Don't wash the vehicles the same day as the installation session. Residual moisture in door seams, panel gaps and around mirrors takes time to evaporate. Wrapping over trapped moisture leads to lifting and bubbling. Wash a day before, not the morning of the job.

Logistics to Think About Before the Day

Fleet installation at your premises needs space and reasonable working conditions. The fitter needs to access all sides of each vehicle and work without the van being moved mid-session. Think about where the work will be done:

  • Is there a covered area - a workshop, loading bay or large garage - where the work can be done out of direct rain? Application in heavy rain isn't possible outdoors, and film applied in cold, wet conditions takes longer to bed in.
  • Can you guarantee the vehicles being worked on won't be needed mid-session? Stopping half way through a panel is not ideal.
  • If the fleet is mixed - different van models or sizes - let us know in advance so the artwork is adapted to each body shape rather than trying to stretch one layout across different templates.

Pricing and What to Expect

Full wraps on a standard panel van typically run from around £1,500 to £3,000 per vehicle depending on the coverage and complexity of the design. Partial wraps and spot graphics cost less - usually £300 to £800 per van for a mid-size vehicle. For a fleet of five or more, the volume affects the economics of design and print, so it's worth discussing per-vehicle pricing with us directly rather than multiplying a single-van quote.

Call us to talk through your fleet size, what you've got ready in terms of artwork, and when your vehicles are available. We'll give you a clear picture of the process and what you can usefully be doing before the job starts.

Working with us in Soham

  • Design and print both done by us, not sent out.
  • Old lettering or wraps removed first, if needed.
  • Fleet work in Soham split into stages.
  • Artwork stored, ready for your next vehicle.

Fleet Wrapping and Branding in Soham?

Let us know what needs branding and we will send a design and price to look over.

Call Quote