Covering Cambridge and the surrounding area Monday to Friday 9:00am - 5:00pm Get a quote

Lorry and HGV Graphics in Soham

Van Wrapping Cambridge designs, prints and fits lorry and HGV graphics for operators in Soham, working on curtainsiders, box vans, flatbeds and rigid trucks at your own premises.

5.0 from 9 Google reviews Est. 2020 A written quote up front Mock-up on your vehicle type first We bring the fitting to you

What the Service Covers

Lorry and HGV graphics range from simple cut-vinyl cab text and door logos through to full large-format printed wraps covering both sides of a curtainsider, the cab front, the rear and any other visible panel. The design and print are handled in-house at Van Wrapping Cambridge. We come to you, so the fitting is done at your depot, yard or regular vehicle location.

A full HGV graphics fit is not a quick job. Depending on the vehicle type and the scope of the design, a full curtainsider or box van can take a full day or more to fit correctly. Understanding what happens before, during and after the fitting helps you plan around it without unnecessary disruption to your operation.

What to Do While You Wait for a Fitting Appointment

Once you have agreed a quote and the artwork has been approved, there is usually a production period before the fitting date. That window is not dead time for you - there are several things worth doing that will make the actual fitting day go smoothly.

Prepare the Vehicle Surface

The single biggest factor in how well graphics adhere is the condition of the surface they go onto. Before the fitting team arrives, the vehicle panels should be:

  • Clean - free from road grime, diesel contamination, bird deposits and wax. A thorough wash with a mild detergent and a final wipe-down is ideal. Do not apply any polish or wax after washing, as these leave a residue that reduces adhesion.
  • Dry - wet or damp panels cause adhesion problems. If the vehicle has been washed, give it at least a day to air-dry fully before the fitting date.
  • Undamaged where possible - if there are dents or areas of rust on the panels that the graphics will cover, flag these to us in advance. Graphics applied over significant corrosion or body filler that is not fully cured will not sit flat or bond reliably.

If old graphics or adhesive residue from previous lettering are present on the vehicle, let us know before the fitting date. Removal can be incorporated into the job, but it takes additional time and needs to be allowed for in the schedule.

Confirm Parking and Access

The fitting team needs adequate working space around the vehicle. For a full-size lorry or HGV, that means enough room to work both sides and the rear without obstacles. If your yard is tight or access is shared with other operators, let us know so we can plan the visit around it. Working in a confined space increases the risk of the film being contaminated before it is applied, and makes handling large panels safely much harder.

Have Your Paperwork Ready

If the vehicle needs to remain operational while other fleet vehicles are being done in sequence, work out the scheduling in advance. For operators with multiple vehicles, staggering the jobs - one vehicle in for graphics while others are out working - is usually straightforward to plan, but it needs to be agreed before the production run starts so that the right panels are printed in the right order.

Finalise Artwork Approval Early

The most common cause of a delayed fitting is late artwork sign-off. Once you receive a proof from us, review it carefully and return approval promptly. Check:

  • Spelling of all text, including phone numbers, website addresses and email details
  • Colour accuracy against your brand guidelines
  • Positioning of logos and text relative to panel breaks and vehicle features
  • Any mandatory regulatory markings that need to remain visible or unobstructed

Changes made after the film is printed result in reprinting and additional cost. Changes made after fitting result in significant additional cost. Catch them at proof stage.

What Not to Do Yourself While You Wait

This is as important as the preparation steps above. A well-meaning attempt to get the vehicle ready can create problems that are expensive to put right.

Do Not Apply Touch-Up Paint to Panels Being Wrapped

Fresh paint - even spray-can touch-up paint applied to a small chip - takes much longer to cure fully than it appears. Graphics applied over paint that has not cured cause the solvent in the paint to continue off-gassing, which creates bubbles under the film that cannot be removed. If a panel needs paint repairs before the graphics go on, have that done well in advance and tell us when it was done so we can assess whether it has cured sufficiently.

Do Not Attempt to Remove Old Graphics Yourself

Removing vehicle graphics without the right tools and technique causes paint damage. The temptation to use a scraper, a fingernail or a heat gun held too close is understandable when you want to get the vehicle ready, but the risk of lifting paint, leaving deep adhesive residue or scoring the panel is real. We offer removal as part of our service - let us do it properly. A damaged paint surface under new graphics will show through the film and cannot be corrected without repainting the panel.

Do Not Apply Any Polishes, Waxes or Ceramic Coatings

Any coating that creates a release layer on the panel surface will reduce adhesion. This includes spray detailers, quick-detailing products and silicone-based treatments. If the vehicle has recently been treated with a ceramic coating, tell us - this can significantly affect adhesion and needs to be taken into account before we start work.

Do Not Make Last-Minute Design Changes Without Flagging Them

If a phone number, website address or trading name changes between artwork approval and the fitting date, contact us immediately. Fitting graphics with incorrect information and then having to remove and reprint a panel is entirely avoidable if the change is flagged early enough.

On the Day of Fitting

Have the vehicle available at the agreed time and location. Fitting on a vehicle that arrives late or is unavailable eats into the working time and may mean the job cannot be completed in a single visit. If the vehicle needs to move during the job, let us know in advance - large panels should not be moved in the middle of application.

The fitting team will work through each panel methodically. This takes time. A full curtainsider is a large job. Do not plan to have the vehicle back in service on the same day as a full wrap fit unless that has been specifically confirmed with us in advance.

After the Fitting: The First 72 Hours

For the first 72 hours after fitting, avoid high-pressure washing and unnecessary curtain flexing on curtainsiders. The adhesive is still bonding to the substrate during this period, and disturbing edges before it cures is the most common cause of early lifting. After that period, the vehicle can return to its normal wash routine, though brush rollover washes should be avoided permanently to protect the graphics long-term.

Get Your Fleet Booked In

If you have lorries or HGVs in Soham that need new graphics, a rebrand or removal of old livery, call us to discuss the job. We will come to you, assess the vehicles and give you a clear quote. Getting the preparation right before we arrive saves time on the day and gives you the best possible result.

Working with us in Soham

  • Design and print both done by us, not sent out.
  • Old lettering or wraps removed first, if needed.
  • Fleet work in Soham split into stages.
  • Artwork stored, ready for your next vehicle.

Lorry and HGV Graphics in Soham?

Let us know what needs branding and we will send a design and price to look over.

Call Quote