If you are waiting for vehicle graphics to be fitted in Soham, there are useful things you can do to prepare and a few things you absolutely should avoid.
Between placing an order for vehicle graphics and the day the fitter arrives, there is usually a period of design sign-off, print production and scheduling. Rather than sitting on your hands, there are practical steps you can take that will make the fitting day faster and the result better.
There are also a few things that people attempt in that gap, usually with good intentions, that cause real problems on fitting day. This page covers both.
Surface preparation is the single biggest factor in how well graphics adhere and how long they last. A vehicle that arrives at fitting day covered in road film, polish residue or traffic grime will produce a poorer result than one that has been properly cleaned, even if the fitter prepares it themselves before laying any material.
What helps: a thorough hand wash with a mild, pH-neutral detergent in the days before fitting. Pay particular attention to panel edges, door shuts and the areas around handles and mirrors where grime accumulates. These are exactly the areas where lifted edges tend to start.
What does not help, and can actively cause problems: applying wax, polish or any silicone-based product to the vehicle in the run-up to fitting. Silicone is one of the hardest contaminants to remove from paintwork, and even a trace of it on a panel surface reduces adhesion significantly. If your vehicle is regularly waxed or treated with a spray detailer, let your fitter know so they can degrease those areas thoroughly before starting.
It is tempting, while waiting for the graphics to be done, to touch up chips or minor scratches on the bodywork. The logic makes sense: sort the paint before the graphics go on top. The problem is that rattle-can touch-up paint and DIY repair kits do not cure to the same hardness as factory paint, and they often contain compounds that react badly with vinyl adhesive. Fresh touch-up paint applied shortly before a wrap or graphic is laid can cause the material to lift, blister or fail to bond evenly.
If you need bodywork repaired before graphics are fitted, have it done properly by a bodyshop and allow the standard curing time before the graphics go on. That is typically at least four weeks for a full respray and at least a week for a localised repair. Tell your graphics fitter about any recent paint work so they can adjust their approach.
We come to you in Soham to carry out the fitting, which means the vehicle needs to be in a location where the work can be done. Ideally that means a flat, sheltered surface - a yard, a driveway or inside a unit or garage. Graphics can be fitted outdoors in dry conditions, but dust, wind and direct sunlight all create difficulties, particularly when laying large printed panels. A sheltered spot makes a faster, cleaner job.
If the vehicle needs to be on a public road for the fitting, that is usually manageable, but it is worth flagging in advance so the team can plan around access and conditions.
If your van already has graphics that are coming off as part of this job, leave them in place until the fitter arrives. Removing vinyl without the right heat equipment and technique is a reliable way to damage paintwork. Common results of DIY removal include lifted paint, adhesive residue that bonds more firmly when it cools, and accidental damage to rubber seals around doors and windows.
Removing graphics correctly with a heat gun and the right tools, then cleaning the surface with a proper adhesive remover solvent, is a process that takes time but protects the paint underneath. Trying to speed that up with a scraper or household solvent almost always causes more problems than it solves.
If you have an existing logo, a preferred colour or a specific style in mind, have that information ready before design starts. What slows jobs down most is a lack of direction at the design stage rather than the print and fitting itself. Useful things to gather:
The more direction you can give at the start, the fewer rounds of revision are needed and the faster the job moves through to fitting day.
A few things that people do on the day itself that are worth avoiding:
Small bubbles immediately after fitting are normal. Many resolve on their own within a few days as the adhesive settles and any trapped air migrates out through the material. Larger bubbles, visible lifting at an edge or a section that does not look as expected should be raised with the fitter before they leave the site, or by phone that same day. Do not wait several weeks to report an issue noticed at fitting, and do not attempt to push down or pierce a bubble yourself.
If you have vehicles in Soham or nearby that need signing up, call us to talk through what you need. Getting the preparation right at your end makes the whole process faster - and now you know exactly what that involves.
Also available
We design, print and fit full or partial van wraps in Cambridge, working at your premises so your vehicle never leaves your site.
See detailsWe wrap commercial vehicles of all types in Cambridge, designing and printing everything in-house and fitting at your site.
See detailsWe brand entire fleets of commercial vehicles in Cambridge with consistent, professionally printed graphics, designing and fitting everything…
See detailsLet us know what needs branding and we will send a design and price to look over.