If you're waiting for minibus graphics to be fitted in Soham, there are useful things you can do beforehand - and a few things that look helpful but can cause real problems.
Minibus graphics cover everything from cut-vinyl lettering - a business name, phone number and logo - through to part wraps on specific panels, and full wraps across every painted surface. Schools, sports clubs, care providers, shuttle operators and private hire businesses all use different levels of graphics depending on how prominently the vehicle represents their organisation.
Van Wrapping Cambridge designs and prints in-house and comes to customers in Soham to fit the graphics at your location. You do not need to bring the vehicle anywhere. We work across the full range from simple lettering to full minibus wraps.
There is usually a period between placing an order and the fitting appointment. For a straightforward lettering job this might be a few days. For a full wrap with custom design and large-format printing, it is more likely to be one to two weeks. That gap is not wasted time - there are practical things you can do to make the fitting day go smoothly and reduce the chance of delays.
Vinyl does not adhere properly to a dirty surface. Before the fitting appointment, wash the whole vehicle - paying particular attention to the panels where graphics will go. Remove road grime, bird droppings, tree sap and any visible contamination. A thorough hand wash with clean water and mild detergent is enough. Rinse completely and allow the surface to dry fully.
Do not apply wax, polish or any kind of protective coating in the days before fitting. These products leave a residue on the paint surface that interferes with the adhesive bond. Even spray detailers and quick-shine products can cause problems. If the vehicle has recently been waxed or treated, tell the fitter when they arrive so they can degrease the surface before application begins.
Vinyl applied over bubbling paint, rust or flaking lacquer will not last. The graphic is only as secure as the surface it is bonded to. Walk around the vehicle before the fitting day and note any areas where the paint is damaged. It is much better to raise this in advance than to discover it on the day, which can delay the job or require the design to be adjusted to avoid a problem area.
Vinyl can be applied over minor paint imperfections in many cases, but significant rust, peeling paint or body filler that is not properly sealed will cause the graphic to lift in that area over time. A good fitter will point these out rather than apply over them and say nothing.
The fitter needs to access all sides of the vehicle. When you book, think about where the vehicle will be parked on the day. It needs to be accessible on both sides and at the rear, ideally with enough space to open doors fully and walk around the whole vehicle. A tight corner of a car park where one side is against a wall makes the job much harder and slower.
Covered parking - a garage, carport or large barn - is ideal. It keeps the vehicle out of direct sunlight and away from rain, which matters because vinyl becomes more difficult to handle in very cold or wet conditions. If covered parking is not available, the fitting can still go ahead in most conditions, but tell us what you have available when you book so we can plan accordingly.
This is the section most people skip, and it is where problems most often start.
If your artwork is being prepared by us, the most useful thing you can do is gather everything we need: your logo in a vector format if you have one (.ai, .eps or .svg files), your brand colour codes (Pantone, CMYK or RAL references if you have them), and any examples of graphics you like from other vehicles - not to copy them, but to give us a clear sense of the style and scale you are after.
If you do not have a vector logo file, do not worry - we can work from a high-resolution image or recreate the logo as part of the design process, but tell us this upfront so it is factored into the timeline. Waiting until the day before fitting to mention that your logo only exists as a small JPEG is the most common cause of delays.
Once a design proof is sent to you for approval, review it carefully. Check the spelling of every word - business names, phone numbers, website addresses and slogans. Check that the colours look right and that the layout reads well at vehicle scale. We print and produce exactly what is approved, so this is the point to raise any changes, not after printing has started.
Simple cut-vinyl lettering on a minibus - a name, number and logo - typically starts from around £150 to £300. A part wrap covering the main panels generally costs between £500 and £1,200 depending on how much of the vehicle is covered and the design complexity. Full minibus wraps in the UK typically run from £1,500 to £3,000 or above, depending on vehicle size and design. These are typical UK market figures; your quote will reflect your specific vehicle and brief.
Design and print time, combined with fitting, means a simple lettering job can often be turned around in a few days. A full wrap with bespoke design is more realistically a week to two weeks from first briefing to finished vehicle. Plan around your operational schedule and tell us any dates the vehicle cannot be off the road when you book.
Leave at least 24 hours before washing the vehicle after a new application, and avoid high-pressure washing for the first 72 hours. The adhesive needs time to fully bond to the paint surface. Washing too soon - particularly along the edges - can lift a fresh application before it has fully cured.
Hand washing with mild detergent is always the right approach for vinyl-wrapped or graphically treated vehicles. Automatic brush washes are the fastest way to damage edges and begin the process of peeling. Touchless washes are safer but are still best avoided in the first week after fitting.
Van Wrapping Cambridge covers Soham and the surrounding area. We design and print in-house, come to your location, and will talk you through exactly what to do before we arrive to make sure the job goes cleanly and quickly. Call us to talk through your vehicle, your brief and your timeline.
Also available
We design, print and fit full or partial van wraps in Cambridge, working at your premises so your vehicle never leaves your site.
See detailsWe wrap commercial vehicles of all types in Cambridge, designing and printing everything in-house and fitting at your site.
See detailsWe brand entire fleets of commercial vehicles in Cambridge with consistent, professionally printed graphics, designing and fitting everything…
See detailsLet us know what needs branding and we will send a design and price to look over.