Covering Cambridge and the surrounding area Monday to Friday 9:00am - 5:00pm Get a quote

Part Wraps in Cambridge

A part wrap covers specific panels or sections of your van rather than the whole vehicle. It is a cost-effective way to add professional branding to a commercial vehicle, and we design, print and fit everything in-house, coming to your location in Cambridge to carry out the work.

5.0 from 9 Google reviews Est. 2020 A written quote up front Mock-up on your vehicle type first We bring the fitting to you

What Is a Part Wrap?

A part wrap applies printed vinyl film to selected panels of your vehicle rather than covering it from end to end. Common choices include the rear doors and tailgate, both sides from the rear wheel arch back, the roof, the bonnet, or any combination that suits your budget and your design. Part wraps are widely used by trade businesses, sole traders and small fleets who want a professional branded vehicle without the investment of a full wrap.

The finish on a well-designed part wrap is sharp and intentional. It does not look like a budget compromise if the design is handled correctly. The key is to work with the shape of the panels being wrapped and to position the design so it reads clearly from the angles where your van is most likely to be seen.

Which Panels Can Be Wrapped?

Almost any exterior panel can be wrapped individually or in combination. The most practical choices for commercial vehicles are:

  • Both rear doors or the full tailgate, which is visible whenever you are parked up
  • The two side panels, either full length or from the rear axle back
  • The roof, particularly effective for businesses where vehicles are seen from above, such as city centre locations with multi-storey car parks
  • The bonnet and front bumper for a more distinctive look
  • The lower half of all panels as a colour band or stripe

Combining a part wrap with cut vinyl lettering and graphics on the remaining panels is a popular approach. The printed wrap section carries the brand's colour, imagery or background, while simpler vinyl text is applied to the plain white panels alongside it. The two techniques work well together and keep the overall cost manageable.

What the Work Involves

We design and print everything in-house. Once you have confirmed the panels you want to cover and provided your brand assets or brief, we produce a visual proof showing how the finished job will look on your specific van. The design is laid out on a template matched to your vehicle's make and model so you can see exactly where text, logos and imagery will sit before anything goes to print.

Printing is done on our own wide-format equipment using cast vinyl film. Cast film is the correct material for vehicle applications because it is designed to stretch and conform to curves and recesses rather than lying flat. Calendered film, which is cheaper and thicker, is better suited to flat surfaces such as signboards and windows. We use cast film for all panel work.

We travel to your location to carry out the fitting. This applies to customers across Cambridge and nearby towns including Ely, St Ives, Huntingdon and the villages in between. You do not need to arrange transport to a workshop. We work at your yard, your home or any other suitable location where there is a dry, reasonably sheltered area to work.

Before the film goes on, the panels are cleaned, degreased and dried. This step takes time but it is not optional. Any grease, wax residue or dust left on the surface will prevent the adhesive from bonding properly and will cause the edges to lift within weeks. We take the preparation stage as seriously as the application itself.

How Part Wraps Compare to Full Wraps

A part wrap costs less than a full wrap and is quicker to fit. For many small businesses in Cambridge, the rear and sides of the van are the panels that do most of the advertising work. A striking rear wrap seen by drivers behind you at traffic lights, combined with clear lettering on the sides, achieves most of what a full wrap would deliver at a lower price.

A full wrap makes more sense when you want a colour change across the whole vehicle, when the existing paintwork has visible damage or mismatched panels you want to conceal, or when the brand design relies on a consistent wrap that runs from front to rear. If those factors do not apply, a well-planned part wrap is a sound commercial decision.

Part Wraps for Fleets

Part wraps are a practical option for businesses running several vans. Wrapping the same rear and side panels across a fleet creates a consistent brand appearance without the cost of full wraps on every vehicle. We can produce matched designs across multiple vehicles and fit them on site, working through the fleet over agreed days to minimise disruption to your operation.

Fleet consistency matters because customers and potential customers often see your vehicles before they see your website or any other advertising. A set of vans with matching part wraps looks like a professional, established business. Mismatched or absent graphics on a fleet sends a different message.

Wrap Removal

If your business rebrands, the part wrap can be removed and replaced. We carry out removal as well as fitting. Using the right tools and heat, the film comes off cleanly without damaging the paint underneath, provided the original paintwork was in sound condition before the wrap was applied. This is worth knowing when buying a second-hand van with an existing wrap: the condition of the paint under the film is unknown until removal.

Pricing and Timescales

Part van wraps are typically priced according to how many panels are being covered and the complexity of the printed design. A single rear door wrap sits at the lower end; a full side and rear combination with a detailed design sits at the higher end.

Call us with your vehicle details and an idea of which panels you want to cover and we will give you an accurate quote.

What is included

  • A mock-up of the design on a vehicle like yours.
  • Design and printing handled in-house.
  • Fitting on site at a time that suits your work.
  • Artwork kept for any vehicles you add later.

Questions

Part Wraps - common questions

How much does van wrapping cost in Cambridge?
A full wrap on a medium-wheelbase panel van typically costs between £1,500 and £2,500 depending on vehicle size and design complexity. Partial wraps covering sides and rear start from around £400 to £800. We design and print in-house, which keeps costs down compared with using separate design and fitting suppliers.
What am I likely to pay to have a commercial van wrapped in Cambridge?
A full wrap on a medium-wheelbase panel van typically costs between £1,500 and £2,500. Larger vehicles such as long-wheelbase high-roof vans or luton bodies generally fall in the £2,500 to £4,000 range. We design and print in-house, so there are no separate design agency fees to add on top.
Is fleet vehicle wrapping expensive compared with other forms of advertising?
Fleet wrapping is a one-off spend that continues generating advertising impressions for the life of the wrap, with no recurring monthly cost. A full wrap on a medium-wheelbase van typically costs between £1,500 and £2,500 per vehicle, with per-vehicle costs often reducing for larger fleets. Compared with ongoing digital or print advertising budgets, it is generally considered cost-effective over a multi-year period.
What should I budget for a full van wrap in Cambridge?
A full wrap on a standard panel van in Cambridge typically costs between £1,200 and £2,500. The final price depends on the size of your vehicle, how complex the design is and how many panels need covering. We will give you a specific figure once we know the vehicle make and model.
What am I likely to pay for a part wrap on my van in Cambridge?
The cost of a part wrap depends on how many panels you are covering and how detailed the design is. A single rear wrap sits at the lower end; a full sides and rear combination with a printed design is at the higher end. We can give you a firm figure once we know your vehicle and what you need.
How is van signwriting priced in Cambridge?
Van signwriting is typically priced on the amount of vinyl being produced and fitted. A standard set of cut vinyl lettering on both sides and the rear of a panel van usually costs between £150 and £500. Including printed elements such as a full-colour logo decal adds to the cost. We give you a price based on exactly what you want on the vehicle.
What should I budget for van graphics in Cambridge?
For cut vinyl lettering with a logo on a standard panel van, expect to pay around £150 to £400. A full printed wrap on a transit-sized van typically costs between £800 and £2,500 depending on the design complexity and vehicle size. Partial wraps covering the rear doors and lower panels sit somewhere in between.
What am I likely to pay to have my car or van sign-written in Cambridge?
Cut vinyl lettering on a car or small van starts from around £100 to £250 for basic contact details and a logo. Printed partial graphics on a panel van typically cost £300 to £700, while a full printed wrap ranges from roughly £800 for a small car to £3,000 or more for a large van with a complex design. The exact price depends on the vehicle size, coverage and design complexity.

Part Wraps in Cambridge?

Phone us, or use the enquiry form to list your vehicle types and how many there are, and a written price will follow.

Call Quote