Here's exactly what happens when we fit vehicle graphics for a business in Ely - from the first conversation about artwork to driving away with a finished, sign-written vehicle.
Every job starts with a conversation, not a template. We need to know what vehicle or vehicles are involved, what information needs to go on them - business name, services, phone number, website, logo - and whether you already have brand guidelines or artwork, or whether you're starting from scratch.
It's worth being clear at this stage about what the vehicle is used for and how visible it needs to be. A van parked on residential jobs needs clean, legible text at a distance. A car used for sales visits might need something more considered in terms of layout and colour. A fleet of three vans all needs to look consistent from panel to panel. These aren't small details - they shape the design from the start.
If you have an existing logo in a usable format (a vector file or a high-resolution image), bring that into the conversation early. It makes the design process faster and more accurate. If your logo only exists as a low-resolution image on a business card or website screenshot, we'll need to redraw it - which is possible, but takes additional time.
When choosing a company to design your graphics, it helps if they design in-house. That way you're dealing with one team throughout, not passing information between a designer at one company and a fitter at another. The design is created to fit your specific vehicle's panel layout, not a generic van outline.
Vehicle templates - digital diagrams of the vehicle's panel shapes - are used to position artwork accurately. This matters because a graphic that looks right on a flat screen can sit awkwardly on a van with a wheel arch, a sliding door rail or a step in the bodywork. Designing around the actual vehicle avoids surprises at the fitting stage.
You'll see a proof before anything is printed. This is your chance to check that the phone number is right, the spelling is correct, the colours match your brand and the layout works across the panels. Take this step seriously - corrections at proof stage are straightforward, while corrections after printing mean reprinting and additional cost.
Colour on screen and colour in print can differ, particularly for brand colours. If you have a specific colour reference - a Pantone code, for example - provide it, and we can match the printed output as closely as the print process allows. Pure white and pure black are reliable. Mid-range colours and fluorescents need care.
Once the proof is signed off, we print in-house. We use outdoor-rated inks on suitable vinyl film, with an overlaminate applied to protect the printed surface from abrasion and UV exposure. The laminate is a practical part of the job, not an optional extra - it's what allows the printed colours to stay sharp on a working vehicle.
The film is then cut to shape using a plotter. For cut vinyl work - lettering and logos in solid colour without printing - the process goes straight from artwork to plotter. For printed graphics, the printed sheet goes through the plotter after laminating.
Print quality and consistency matter most when you're doing multiple vehicles. Printing all vehicles in a fleet run at the same time, from the same files, with the same ink profiles, is the most reliable way to ensure colour consistency across the fleet. Reprinting one van six months later and trying to match it to the others is harder - screens and printers drift slightly over time.
This is the step that determines how long the graphics perform. We come to you in Ely - the work is carried out at your premises or yard - and before any film goes on the vehicle, the panels are cleaned thoroughly. That means removing wax, polish, grease and any old adhesive residue from previous graphics.
Isopropyl alcohol is typically used for a final wipe-down of the panel surface. The vehicle paintwork needs to be dry and at a reasonable temperature. Film adhesion is compromised if the surface is cold or damp, which is why fitting outside on a cold morning in winter is not good practice. Where possible, working in a covered, sheltered area improves the outcome.
Any chips or damage to the paintwork are worth noting before fitting begins. Graphics won't bond well over rust bubbles or damaged clearcoat, and fitting over a problem area won't hide it - the texture will show through the film. If the vehicle has had bodywork repairs that left a texture difference, that's worth flagging at the outset.
Fitting is done with a squeegee to press the film flat and work out any air. For larger panels and full wraps, the film is applied using either a wet method - where a small amount of water-based solution is used to allow repositioning before the adhesive sets - or a dry method with an air-release adhesive that lets small bubbles be worked out without moisture.
Tight areas - door handles, recesses, body creases and bumper curves - need heat applied with a heat gun to relax the film and allow it to conform to the shape without lifting or creasing. This is where film type matters: cast film responds well to heat forming, while stiffer calendered film can resist it and stress in the material. Rushing this stage, or using the wrong film for the vehicle's shape, is where lifting edges and bubbles start.
Edges are trimmed cleanly and pressed firmly. Any visible cut edge of the film should ideally be tucked into a seam or recess wherever the vehicle's design allows, rather than left as a free edge on a flat panel surface. Free edges are where moisture gets in and lifting begins.
Once the graphics are on, we work over every panel carefully - checking for air bubbles, edge lifts or misaligned sections. Small bubbles that appear immediately after fitting in warm conditions often disperse as the adhesive cures; a fitter who knows the difference between a bubble that will settle and one that won't is a useful thing to have on site.
Any offcuts, backing paper and waste material are cleared up before we leave. The vehicle is ready to use straight away - there's no curing time that requires the vehicle to sit idle, though it's sensible to avoid pressure washing the edges within the first few days if possible.
If you're choosing a fitter, check that they're insured and have experience with your type of vehicle, whether it's a car, van, trailer, minibus or fleet vehicle. Old or failed graphics should be removed by stripping the film carefully, leaving the paint in the best condition possible before new material goes on.
The finished job should look crisp and flat, with no visible bubbles, no uneven edges and consistent colour across all panels. If anything doesn't look right when we're done, say so before we leave - that's the right time to address it.
Looking after sign-written graphics is straightforward: hand washing with a soft cloth and mild detergent keeps them in the best condition. Automatic car washes with rotating brushes stress the edges over time. Pressure washing directly at panel edges should be avoided.
If you're ready to get a vehicle or fleet sign-written in Ely, call us and we'll walk through what you need. We come to you, we design and print in-house, and we fit to a standard that keeps your van looking the way you need it to look on the job.
Also available
We design, print and fit full or partial van wraps in Cambridge, working at your premises so your vehicle never leaves your site.
See detailsWe wrap commercial vehicles of all types in Cambridge, designing and printing everything in-house and fitting at your site.
See detailsWe brand entire fleets of commercial vehicles in Cambridge with consistent, professionally printed graphics, designing and fitting everything…
See detailsLet us know what needs branding and we will send a design and price to look over.