Covering Cambridge and the surrounding area Monday to Friday 9:00am - 5:00pm Get a quote

Van Wrapping in Ely - How the Job Works, From First Look to Clean-Up

If you are based in Ely and want to know exactly what happens when you book a van wrap - from the first conversation to driving away with a finished vehicle - this page walks through every stage.

5.0 from 9 Google reviews Est. 2020 A written quote up front Mock-up on your vehicle type first We bring the fitting to you

Stage 1: The Initial Conversation

Every job starts with a conversation about what you need. You do not need to know the technical details - that is our job. What helps us at this stage is knowing the make, model and year of the van, whether you have existing artwork or need a design from scratch, and roughly what you want the finished vehicle to show: your business name, contact details, services, any imagery.

It is also useful to know the condition of the van's paintwork at this stage. If there are areas of rust, deep scratches or previous bodywork repairs where the paint is flaking, we need to know before we quote. A wrap applied over damaged paintwork will not perform as it should, and those areas will need attention before anything else happens.

Stage 2: Design

We design in-house. If you have an existing logo or brand guidelines, send them across and we work with what you have. If you are starting from scratch, we work with you to develop something that communicates your business clearly at a glance.

Van livery is not the same as print design or web design. The graphics need to work at speed - when someone sees your van drive past, they have about two seconds to take something in. That means hierarchy matters: the most important information (your business name and what you do) needs to be instantly readable, with contact details clearly placed. We produce a visual proof of the design laid over a template of your specific van so you can see how it sits before anything is printed.

Revisions are part of the process. Most customers want to see at least one round of changes before they sign off - adjusting a colour, moving a phone number, tweaking the layout. We build that into the job rather than treating it as an extra.

Stage 3: Print

Once the design is signed off, it goes to print in-house. We use wide-format print equipment to produce the graphics at the correct scale. The film is printed and then laminated - the laminate layer protects the printed surface from UV exposure, abrasion and the general wear of daily driving. The laminate also affects the finish: a gloss laminate produces a bright, vivid finish; a matt laminate gives a flat, contemporary look.

Print and lamination typically take a day, though the film needs time to outgas after printing before it is applied. Outgassing is the process by which residual solvents in the ink escape from the film. If the film is applied before this is complete, small bubbles can appear under the surface as the solvents have nowhere to go. Allowing adequate time between print and application is a basic quality step that not every installer bothers with.

Stage 4: Surface Preparation

This is the stage that determines more than any other whether the wrap lasts. We come to you in Ely - the work is done at your premises or wherever the van is based. When we arrive, the first task is a thorough surface preparation of every panel that is to be wrapped.

Preparation involves washing the van to remove loose dirt, then wiping every panel with an isopropyl alcohol (IPA) solution to strip wax, polish, oil and any other contaminants from the surface. Even a seemingly clean van will have a layer of wax, traffic film or other residue that will prevent the adhesive from bonding correctly. Any badges or trim that might interfere with the wrap going on cleanly are removed at this stage - most factory badges come off easily and go back on just as cleanly afterwards.

Recessed areas around door handles, panel edges and body seams get particular attention. These are the areas where adhesion failure tends to start if the prep is not thorough.

Stage 5: Application

The vinyl panels are applied to the van in sections. The sequence matters: typically larger flat panels first, then working into the more complex areas around curves, door handles and seams. Each panel is positioned carefully before the backing is removed and the film is committed to the surface.

A squeegee is used to smooth the film from the centre outward, pushing out air and working the adhesive into full contact with the paintwork. For areas that require the film to conform around curves - wheel arch lips, door mirror housings, body lines - a heat gun is used to warm the vinyl so it stretches and forms to the shape without stress. The temperature and the technique here are critical. Too little heat and the film does not conform properly. Too much heat in one place and the film is over-stretched, which shows up as a thinned or discoloured patch.

Seams - where two sections of film meet - are placed at natural break points in the bodywork where possible, such as door edges or panel joints. A seam placed across the middle of an open panel is visible and looks unprofessional. We plan the panel layout during the design stage to avoid this where the van's shape allows.

Stage 6: Detail Work and Finishing

Once the main panels are on, the detail work begins. Edges are sealed down with extra care using a heat gun and firm pressure. Film is wrapped around door edges where the door is thick enough to allow it, giving a clean finish when the door is opened rather than a visible vinyl edge. Badge recesses and trim details are finished carefully so the graphics do not look like they have been stuck on top of a production vehicle - the aim is for the wrap to look like it belongs on the van.

Any small bubbles that remain after application are typically worked out through the film with a soft tool. Minor bubbles in the first 24-48 hours after fitting often settle on their own as the adhesive cures and any remaining air finds its way out through the micro-channels in the adhesive layer. This is normal and not a cause for concern.

Stage 7: Inspection and Clean-Up

Before we consider the job done, the van is inspected in full. We check every panel, every seam and every edge under good light. Any area that is not sitting correctly is re-worked before we leave. It is far easier to fix a lifting edge or a small bubble on the day than to come back to it later.

The work area is cleaned up - offcuts of vinyl, backing paper, packaging and anything else we brought with us leaves with us. The van is left ready to use, though we advise leaving it overnight before washing it for the first time to allow the adhesive to cure fully.

Stage 8: Aftercare Advice

A wrapped van does not need complicated aftercare, but a few simple habits make a real difference to how long the graphics last. Hand washing is gentler than automated or pressure washing, and when using a pressure lance, keeping it back from the edges of panels prevents the high-pressure stream from lifting the film over time. Wax and polish should not be applied over the wrapped surface - they leave a residue that attracts dirt and can interfere with the adhesive at the edges.

Check that any installer you use is insured. We travel to customers across Ely and the surrounding area. If you want to know what a wrap job would involve for your specific van, give us a call and we will talk you through it.

Working with us in Ely

  • Design and print both done by us, not sent out.
  • Old lettering or wraps removed first, if needed.
  • Fleet work in Ely split into stages.
  • Artwork stored, ready for your next vehicle.

Van Wrapping in Ely?

Let us know what needs branding and we will send a design and price to look over.

Call Quote