If you are planning fleet livery for your Ely business and want to know exactly what happens from the first conversation to the moment your vehicles go back on the road, here is the full process, step by step.
Fleet wrapping starts with a conversation about what you need, not a sales pitch. We need to know how many vehicles are in your fleet, what types and sizes they are, what your current branding looks like (or whether you are starting from scratch), and whether there are any existing graphics that need to be removed first. This information shapes everything that follows.
Vehicle condition matters too. A wrap applied over damaged or poorly prepared paintwork will not perform as well as one applied to a clean, sound surface. Dents, rust bubbles and flaking lacquer all affect adhesion. We will flag anything that needs attention before work begins, so there are no surprises once installation starts. For an Ely fleet manager, this initial assessment is the most useful part of the process - it surfaces issues early and lets you plan properly.
We design in-house. That means your artwork is built on the actual vehicle templates for your specific makes and models - not a generic van outline. Panel dimensions, door seams, wheel arches, windows and handles are all accounted for in the design, so what you approve on screen translates accurately onto the vehicle.
For fleet work, design consistency across all vehicle sizes is essential. A design that works on a Transit-sized panel van needs to adapt sensibly to a Transit Connect or a Sprinter without looking stretched or cramped. We build the artwork so logos, text and graphic elements sit correctly on each vehicle in the fleet, using the same visual language throughout.
Colour is handled carefully. We work to your brand colour references and profile our print output to match them. If you have existing brand guidelines with specific colour codes, bring them to the conversation at the start. If you are building a brand from scratch, we can advise on colours that reproduce accurately and consistently in print.
Before anything is printed, you sign off the design. For fleet work, we typically show you the artwork on a rendered vehicle image so you can see how the livery sits on the actual vehicle shape. This is the point to request changes - to layout, colour, text, logo size or anything else. Changes made at this stage cost nothing except a little time. Changes requested after print has started cost money.
For a fleet of several vehicles, it is worth having your decision-maker or marketing contact review the proof carefully. Check that phone numbers and web addresses are correct, that the logo is the current version, and that the colour on screen looks right. Print colour and screen colour are never identical, but a good proof will give you a reliable indication of the finished result.
Once artwork is approved, we print in-house. We use wide-format print processes and apply a protective overlaminate to all printed graphics before they go anywhere near a vehicle. The overlaminate protects the ink from abrasion, UV and chemical contact - all things a working commercial vehicle encounters every day.
Print and preparation time varies depending on the size of the job and how many vehicles are in the fleet. For a large fleet, print may be batched across several sessions. The important thing is that all graphics for a given fleet are produced in the same print run or with consistent colour settings, so there is no colour drift between vehicles.
Vehicle preparation is carried out immediately before installation. Each vehicle is cleaned thoroughly, and panels are wiped down with a panel prep solution to remove any trace of wax, silicone or contamination. This step is non-negotiable. Any contamination left on the panel will compromise adhesion, and problems that result from poor preparation show up weeks or months later as bubbling and lifting.
We come to you. For Ely businesses, that means we travel to your site and carry out the installation at your premises. You do not need to arrange transport of vehicles to a workshop.
A good installation environment helps. The ideal is an undercover space - a workshop, garage or large unit - that is reasonably warm and dust-free. Vinyl film applied in cold conditions is less pliable and harder to work around curves and body detail. Dust and debris settling on wet adhesive causes problems. We will advise you on the best conditions for your site, and we work around what you have.
The installation process for each vehicle involves carefully positioning the film on the panel, using a squeegee to work out air from beneath the film and ensure full adhesion, and then finishing edges, seams and detail areas by hand. Around door handles, mirrors, wheel arches and bumpers, the film is worked carefully to follow the contour of the vehicle. Any seams are positioned where they will be least visible and least vulnerable to lifting.
For a full vehicle wrap, installation typically takes a full working day per vehicle, sometimes longer on larger or more complex vehicles. Partial liveries and cut-only graphics are quicker. We will give you a realistic time estimate for each vehicle so you can plan your fleet schedule accordingly.
Most fleet operators cannot take all their vehicles off the road at the same time. We work in batches, scheduling installation across days or weeks to match your operational requirements. The key is to complete vehicles one at a time to a consistent standard, rather than rushing all of them through simultaneously.
If your fleet is replacing old livery with new, we also carry out wrap removal before the new graphics go on. Removal is done carefully with controlled heat to avoid damaging the underlying paintwork. Any adhesive residue left after removal is cleaned off before the new film is applied. Applying new film over old, degraded graphics is not a shortcut we recommend - it affects the final finish and long-term adhesion.
Once installation is complete on each vehicle, we carry out a thorough inspection of the finished work - checking edges, seams, detail areas around handles and lights, and the overall appearance. Any areas that need attention are dealt with before we finish on that vehicle.
We leave your site clean and tidy. Any off-cuts, backing paper and packaging are removed. The vehicles go back to you ready to work. For an Ely business, that means minimal disruption and a fleet that looks consistent and professional from the moment it goes back on the road.
If you want to talk through how the process would work for your specific fleet, call us and we will walk you through it properly.
Also available
We design, print and fit full or partial van wraps in Cambridge, working at your premises so your vehicle never leaves your site.
See detailsWe wrap commercial vehicles of all types in Cambridge, designing and printing everything in-house and fitting at your site.
See detailsA full van wrap transforms your entire vehicle into a moving advertisement for your business.
See detailsLet us know what needs branding and we will send a design and price to look over.