If you've never had a van wrapped before, here's exactly what the process looks like for commercial vehicle wrapping in Ely, from the first conversation to driving away with a finished vehicle.
The job starts with a conversation about the vehicle and what you want it to do. We need to know the make, model and year of the vehicle, because panel shapes vary between manufacturers and even between generations of the same van. A design that works on one body style won't necessarily lay out the same way on another.
We also need to know what the van is for and who you're trying to reach. A builder working across a wide area needs legible contact details from a distance. A catering business doing events needs imagery and brand presence. The purpose of the vehicle determines the design approach, and the design approach determines how much coverage and what type of material is appropriate.
We handle design in-house, so this stage isn't just a tick-box exercise. It's where the actual design work begins.
Once we have the vehicle details, we work up a design to scale against the actual template for that vehicle. That means you're looking at an accurate representation of how the finished wrap will sit on the panels, not a rough impression on a generic van outline.
Colour accuracy matters here. What looks right on a screen doesn't always translate directly to a printed surface on a vehicle in natural light. We factor in how the printed colours will read against the vehicle's existing trim, door seams and handles. If we're doing a partial wrap and the base paint is showing, the design has to account for that too.
We ask you to sign off the design before anything is printed. Changes made at this stage cost nothing compared with changes made after the film comes off the printer. Take the time to check that your phone number, website and trade description are exactly right. These are the details that will be on the vehicle for years, and mistakes on a finished wrap mean removing and reprinting.
We print in-house. The design file goes to our printer once the artwork has been approved, and we control the colour calibration throughout. This matters because the finished print needs to match what you approved, not drift slightly because a third-party print house runs a different profile.
The film is printed in panels corresponding to the sections of the vehicle it will cover. After printing, the film is laminated - a clear protective layer is applied over the print to protect it from UV, abrasion and washing. The choice of laminate determines whether the finish is gloss, matt or satin, and that choice should be made before printing because it affects how the colours read on the finished vehicle.
Print and lamination typically take place ahead of the fitting appointment, so the film is ready to go when we arrive at the vehicle.
This is the stage most customers don't see, but it's the one that determines how well the wrap performs over its lifetime. When we arrive at your premises in Ely, the first thing we do before any film comes out is prepare the vehicle's surface.
Preparation means cleaning the panels thoroughly with a degreasing agent, not just a wash. Any wax, polish or silicone product on the surface will prevent the adhesive from bonding correctly. We work around panel edges, door seams and recesses - areas where contamination collects and where the film is most likely to lift if the surface isn't clean.
If there are any areas of the paint that are flaking, corroded or otherwise compromised, these need to be identified before we start. Vinyl applied over failing paint will lift when the paint does. We check the panels before committing to fitting, and if something is likely to cause a problem, we'll tell you.
Any existing graphics or old film is removed at this stage if it hasn't already been dealt with. Old adhesive residue is treated and removed. The surface needs to be as close to bare, clean, solid paint as possible before the new film goes on.
Fitting starts with the larger panels and works methodically around the vehicle. Film is positioned, aligned and laid down section by section. Where the design has to follow a panel seam or wrap around a curve, the film is heated with a heat gun to make it pliable, stretched into position and pressed down firmly.
Recesses around door handles, mirrors and wheel arches take the most time. This is where cheaper or rushed jobs tend to fail first - if the film isn't worked properly into a recess with heat, it will start lifting from that point outward. The film needs to be stretched into the recess itself, not just pressed against the edge of it.
Overlaps at panel joins are trimmed cleanly with a blade. The cut line should sit in a natural break - a seam or a recess - wherever possible, so it isn't visible from a normal viewing distance. On a well-fitted wrap, panel joins should be difficult to spot.
Once all panels are fitted, we go over the whole vehicle checking for any bubbles, lifted edges or areas where the film hasn't bonded fully. Small bubbles that appear during fitting usually work their way out as the adhesive beds in over the first day or two, but anything larger is dealt with on the spot.
Before we're finished, we do a full visual check of the completed vehicle in good light. We're looking at edge adhesion, colour consistency across panels, the alignment of text and graphic elements, and the overall cleanliness of the finish.
We clean up and leave your yard or premises as we found it. We work at your location, so there's no vehicle drop-off and no waiting around for it to be ready at another site. Because design, print and fitting all go through us, there's one point of contact throughout.
Once you've driven the vehicle for a day, check the edges and recesses for any lifting. The adhesive continues to cure after fitting, and in cool conditions this can take slightly longer. If anything looks wrong in the first few days, contact us and we'll come back to look at it.
We also carry out wrap removal. When a vehicle is being sold, re-branded or the graphics have reached the end of their life, proper removal is important. Film removed with controlled heat and the right tools comes away cleanly without damaging the paint underneath. Cold or rushed removal tears the film and can pull paint or leave adhesive that takes considerable effort to clear.
If you're based in or around Ely and you want to know what the process would look like for your specific vehicle, call us and we'll talk through it with you.
Also available
We design, print and fit full or partial van wraps in Cambridge, working at your premises so your vehicle never leaves your site.
See detailsWe brand entire fleets of commercial vehicles in Cambridge with consistent, professionally printed graphics, designing and fitting everything…
See detailsA full van wrap transforms your entire vehicle into a moving advertisement for your business.
See detailsLet us know what needs branding and we will send a design and price to look over.