Covering Cambridge and the surrounding area Monday to Friday 9:00am - 5:00pm Get a quote

Vehicle Graphics in Cambourne

If your van or fleet vehicle is not working as a moving advert, it may be showing signs it is time to get proper graphics fitted - and we come to you in Cambourne to handle the whole job.

5.0 from 9 Google reviews Est. 2020 A written quote up front Mock-up on your vehicle type first We bring the fitting to you

What Vehicle Graphics Actually Do for a Tradesperson

A sign-written van does something a website cannot: it puts your name, number and trade in front of hundreds of people every day without any ongoing cost. Every job you drive to, every car park you sit in, every street you park on - that is free advertising. For tradespeople and small businesses working in and around Cambourne, that visibility adds up fast.

Vehicle graphics do not have to mean a full wrap. A well-designed set of cut vinyl lettering with your logo, trade and phone number can be just as effective and costs considerably less. The goal is legibility at distance - someone in a passing car or glancing from a pavement needs to read your number before you are out of sight.

Warning Signs: Your Current Graphics Are Letting You Down

This is the angle most people miss. It is not just about vans with no graphics at all. If you already have something on your vehicle, it could actually be working against you. Here are the signs worth checking for.

Peeling Edges and Lifting Corners

Graphics lift at edges when the surface was not prepared properly before fitting, when a lower-grade material was used, or when the vehicle has been through too many automated car washes with high-pressure jets catching the film edges. Once a corner lifts, water and dirt get underneath and the adhesive fails progressively. A partially peeled graphic looks far worse than no graphic at all - it signals to customers that you do not maintain your kit.

Fading and Discolouration

Printed graphics exposed to UV will fade over time. White vans sitting outside daily will show this fastest on south-facing panels. The colours shift and become uneven, so a logo that was once a sharp blue or red becomes washed out and inconsistent. If your graphics no longer match your business cards, your website or other branded materials, that inconsistency undermines trust. Customers notice even when they cannot name exactly what looks wrong.

Bubbling Beneath the Surface

Small bubbles that appear shortly after fitting usually settle as the adhesive cures - that is normal. Bubbles that appear months or years later, particularly in clusters, point to a moisture or contamination problem during the original install. This often happens when graphics are fitted outdoors in damp conditions or on a vehicle that was not fully clean and dry. The only fix is removal and refitting.

Cracking on Curved Panels

If your vehicle has complex curves - wheel arches, door handles, bumpers - and the graphics run across them, a material that lacks sufficient stretch will eventually crack along those stress lines. Good-quality cast vinyl is designed to conform to curves and hold its shape. A cheaper calendered film will not, and after a year or two on a curved panel it will show hairline cracks. These are irreparable without replacement.

Outdated Contact Details

This one sounds obvious but it catches people out. If your phone number has changed, if you have moved premises, if your website URL is different, or if you have rebranded - old graphics with wrong details actively misdirect potential customers. Someone who cannot reach you on the number on your van is not going to try harder to find you. They will call the next result on Google.

No Graphics at All

An unmarked van or car is a missed opportunity every single day it is on the road. For a sole trader or small fleet owner, every vehicle that goes out without branding is a vehicle that is not selling for you while you work. The cost of fitting graphics is typically recovered in a handful of new customers over the life of the graphics.

What Causes These Problems - and How to Avoid Them

Most graphic failures come down to three things: wrong material for the application, poor surface preparation, or fitting in unsuitable conditions. Understanding these helps you ask the right questions when you get graphics fitted.

Material Choice

There are two main categories of vinyl film: cast and calendered. Cast film is thinner, more flexible and better suited to complex curves and long-term exterior use. Calendered film is thicker and stiffer, better for flat surfaces and shorter applications. Using calendered material on a van with deep recesses or curves around door handles is a known cause of premature failure. For vehicle graphics that need to last several years on a commercial vehicle, cast film is the right choice for most applications.

Printed graphics also vary by ink system. Solvent and eco-solvent inks bond well with outdoor vinyl and resist UV and rain. Latex inks are another option used in professional print setups. What matters is that the ink system matches the film being used - a mismatch causes adhesion problems or accelerated fading regardless of how well the job is fitted.

Surface Preparation

The vehicle surface must be completely clean, dry and free from wax, silicone or contamination before any film goes on. Wax and polish leave a microscopic residue that stops the adhesive bonding properly. Even touching the panel with a bare hand before fitting can transfer enough oil to cause a localised adhesion failure later. A proper preparation process uses isopropyl alcohol or a specialist cleaner to strip the surface, then the panel is allowed to fully dry before the film is applied.

Dents and paint chips also matter. Graphics fitted over damaged paintwork will follow the contour of the damage and may not adhere uniformly around chips. Minor damage should be noted before fitting so you understand how it may affect the result.

Fitting Conditions

Temperature affects how adhesive performs. Below around 10 degrees Celsius, the adhesive becomes less pliable and the film harder to stretch into curves without trapping air. Fitting in cold, damp conditions - especially outdoors in winter - is a common cause of early failures. Ideally, graphics should be applied at temperatures between roughly 15 and 25 degrees Celsius, in a sheltered environment. We come to your premises in Cambourne and assess conditions before we start - if it is not suitable, we will say so rather than fit in conditions that will cause problems.

Our Process: Design, Print and Fitting

We handle everything in-house. Design, print and fitting are all done by us - there is no outsourcing the print to a third party and hoping it comes back looking like the proof. When you approve a design, we print it ourselves on our own equipment, so what you see on screen is what goes on the van.

Fitting is done at your location. We come to your business premises, depot or yard in or around Cambourne. You do not need to drop the vehicle off or arrange collection. For fleet jobs with multiple vehicles, we work through the schedule at your site so your operation is disrupted as little as possible.

We also remove old graphics. If you need to update a vehicle, rebrand a fleet or return a leased vehicle to plain paintwork, we can lift existing graphics cleanly. Removal done correctly should not damage the paint underneath, but the condition of the original paintwork and the age of the graphics both affect the outcome - we will tell you honestly what to expect before we start.

What Vehicle Graphics Typically Cost

Pricing varies considerably depending on what you need. As a rough guide for a standard panel van:

  • Cut vinyl lettering only (name, number, trade) - typically from around £150 to £300 depending on the amount of text and number of panels
  • Printed graphics panel - a digitally printed design covering part of the vehicle, from around £300 to £600 for a standard side panel
  • Full vehicle wrap - typically £1,500 to £3,000 or more for a large van, depending on complexity and coverage
  • Fleet discounts apply when you have multiple vehicles done at the same time or in a planned programme

These are indicative ranges, not quotes. The only way to get an accurate price is to tell us what you need. Call us and describe the vehicle, what you want to show, and how many vehicles are involved - we will give you a straight number.

What to Ask Before You Book Anyone

Whoever you use for vehicle graphics, these are the questions worth asking before you commit:

  • Do you design and print in-house, or do you outsource the print?
  • What type of vinyl film do you use - cast or calendered - and why is it right for my vehicle?
  • Will you come to my premises to fit, or do I need to bring the vehicle to you?
  • Can you remove my existing graphics before fitting the new ones?
  • Are you insured to work on my site?

If the answers are vague, that tells you something. For vehicle graphics in Cambourne, call us directly and we will answer all of these plainly.

Working with us in Cambourne

  • Design and print both done by us, not sent out.
  • Old lettering or wraps removed first, if needed.
  • Fleet work in Cambourne split into stages.
  • Artwork stored, ready for your next vehicle.

Vehicle Graphics in Cambourne?

Let us know what needs branding and we will send a design and price to look over.

Call Quote