Van Wrapping Cambridge fits full van wraps in Ely from start to finish, designing and printing in-house and coming to your premises so you can see every stage of the job.
A full van wrap is not a job you can just turn up for. Done properly, it involves several distinct stages, each of which affects the quality of the finished result. Understanding what should happen - and in what order - helps you judge whether an installer is cutting corners.
Here is what the process looks like from first contact through to driving away with a finished vehicle.
Before any design work starts, we need to know your van. Make, model, year and body variant all matter. A long-wheelbase Transit is a very different surface from a short-wheelbase Berlingo. High-roof models have far more panel area on the sides and back. Vans with deep character lines, pronounced recesses or heavy body sculpting require more careful material choice and installation technique than flat-sided older vans.
We also need to know the condition of the existing paintwork. Flaking paint, previous body repairs, bare metal patches and deep scratches will all affect how the wrap behaves. A wrap applied over unsound paint will not adhere properly, and removing it later risks lifting more paint with it. If the van needs paint repairs before wrapping, that is better to know at the start rather than after the film is ordered.
At this stage we also take note of anything on the van that needs to be removed before fitting - roof bars, rear step plates, side-loading door handles and certain mirror housings are often removed to allow the wrap to tuck neatly underneath, giving a cleaner finish rather than simply wrapping around protrusions.
We produce the design in-house. This means we work from accurate vehicle templates specific to your make and model, so text, logos and design elements are positioned correctly relative to door frames, windows, handles and vents - not floating in the wrong place or bisected by a door gap. If you have existing brand assets (logo files, colour references, font files), supply them in the highest quality version you have. Vector files (AI, EPS or SVG formats) will reproduce sharply at any size. JPEG or PNG logos ripped from a website will not.
We provide proofs for your approval before anything goes to print. Check these carefully. Look at where text and phone numbers sit in relation to door handles and door gaps. Consider how the design reads from across the road, not just on a screen. Changes after printing cost the price of the film.
Once you have signed off the design, we print the panels in-house on wide-format equipment. Printing in-house means the colour output is calibrated to our equipment, and there is no handoff between a design studio and a third-party printer where colour interpretation can shift.
After printing, every panel is laminated. The laminate is a clear overfilm that protects the inks from UV exposure, fuel splashes, bird deposits and abrasion. Gloss, satin and matte laminates are available to match your chosen finish. This is not an optional extra on a full wrap - an unlaminated print degrades significantly faster and scratches far more easily.
Panels are then carefully rolled or stored flat, ready for installation.
We come to you in Ely. The wrap is fitted at your premises, which keeps your van accessible and means you can inspect the work as it progresses. On arrival, the van is thoroughly cleaned - not just a wash but a decontamination of the panels to be wrapped. Traffic film, wax, polish, silicone residue and grease are all removed using appropriate cleaners. Any remaining contamination left on the surface will prevent proper adhesion and create bubbles or lifting edges under the finished film.
Panel edges, door shuts and recesses are wiped down with isopropyl alcohol or equivalent before the film goes near them. If any removable trim or fittings were identified at the consultation stage, they come off now.
Large panels are applied first - typically the sides of the van, as these represent the greatest surface area and the most visible part of the livery. The film is positioned dry first, confirmed against the design proof, then committed and squeegeed down working from the centre outward to prevent air entrapment.
Recessed areas around door handles, body curves and character lines require careful heating with a heat gun to allow the film to conform without stretching to the point of thinning. This is the most technically demanding part of a full wrap job. Rushing these areas produces lifting edges and stress whitening in the film. Good installers take time here.
Edges are wrapped into door shuts and around panel edges wherever possible, rather than cut on the surface of the panel. Edge-cutting on the surface of a painted panel risks scoring the original paint and also gives a less durable finish - the exposed cut edge of the film is more vulnerable to lifting than a tucked edge.
Smaller panels - mirrors, bumpers, door pillars - follow the main sides. The rear doors are typically done last, as these require precise alignment of any continuous design across the door gap.
After the full wrap is applied, the entire vehicle is post-heated. This sets the adhesive properly, particularly at edges and around curves where the film has been stretched. Post-heating is not optional - without it, the film in stretched areas has a memory that can cause lifting over the following days, particularly in cold weather.
The van is then inspected panel by panel in good light. Any lifted edges, small bubbles or misaligned joints are addressed before we pack up. You should inspect the van yourself before we leave - if anything is not right, that is the time to raise it.
We clear up all off-cuts, packaging and waste from your site before we leave. At handover we will tell you how to look after the wrap in the first week - there are a few things to avoid while the adhesive fully cures, including pressure washing directly at seams and prolonged exposure to heavy standing water.
Longer term, a wrapped van should be washed by hand or with a contactless wash rather than a rotary brush car wash. Brush washes can catch edges and lift them over time. The finish is otherwise straightforward to maintain.
To book a consultation for a full van wrap in Ely, call us and we will arrange to visit your site and assess the vehicle in person.
Also available
We design, print and fit full or partial van wraps in Cambridge, working at your premises so your vehicle never leaves your site.
See detailsWe wrap commercial vehicles of all types in Cambridge, designing and printing everything in-house and fitting at your site.
See detailsWe brand entire fleets of commercial vehicles in Cambridge with consistent, professionally printed graphics, designing and fitting everything…
See detailsLet us know what needs branding and we will send a design and price to look over.