If you have never had a van lettered before, knowing exactly what happens from first enquiry to finished result makes the whole process straightforward - here is how we work for customers in Ely.
Every job starts with a conversation about what you need. For most tradespeople, that means your trading name, what you do, a phone number and possibly a website address or logo. For small fleet managers, it might also mean matching existing vehicles so the whole fleet looks consistent.
It helps to have this information ready before you call: the van's make, model and colour; the text you want on it; any existing logo or brand colours; and roughly how much of the van you want to cover. You do not need to have made any design decisions - that is our job - but knowing your basic requirements saves time and lets us give you an accurate price from the start.
We come out to Ely to carry out the work at your premises, so we will also need to know where your van is based or where you want us to meet you.
We produce the design in-house. We do not use a third-party designer or send work off to be created elsewhere. That means we can go back and forth on the design quickly without delays waiting for external sign-off.
For a standard trade signwriting job, we will produce a layout showing how the text and any logo or graphic elements will sit on each panel. We work from a vehicle template that reflects your actual van model, so the proportions are accurate rather than approximate. You will be able to see clearly how large the text will be, where it will sit on the door or body panel, and how the overall layout reads.
Colour accuracy matters here. If you have existing brand colours defined by specific colour references, tell us at this stage. When we print in-house, we can hit those references precisely. If you do not have defined brand colours and you are starting fresh, we can advise on what works well for your trade and your van's base colour.
Nothing goes to print until you have approved the design. This is the right point to scrutinise every detail - spelling of your trading name, the exact phone number, the website address, the layout and proportions. Errors that get through at this stage are expensive to correct once the vinyl is cut or printed and applied.
Check the phone number digit by digit. It sounds obvious, but a transposed number on a van that is then driven for three years means three years of calls going to the wrong person. Check any web address letter by letter too. These are small details that have a real commercial consequence.
Once approved, we produce the graphics in-house. Cut vinyl lettering is plotted on a digital cutter - each letter and character is cut precisely from the vinyl sheet, weeded (the waste material removed), and mounted on a transfer tape ready for application. Printed graphics are output on our own print equipment, then laminated to protect the surface before they are prepared for the van.
Producing everything ourselves means we are not waiting on a supplier's lead time, and we can quality-check the finished material before we ever arrive at your van. If a colour is off, or a cut has not gone quite right, we catch it at this stage rather than on the day.
This step is often underestimated, but it is as important as any other part of the job. Vinyl will not bond permanently to a surface that has any contamination on it - polish, wax, silicone, road film or even fingerprints all interfere with adhesion.
The panels receiving signwriting are cleaned and degreased thoroughly before anything goes on. If there is any existing vinyl, decals or old signwriting to remove first, we do that at this stage using heat and appropriate tools. Removal needs to be done carefully - particularly on older vehicles where the original paint may be softer or where the existing vinyl has been on for many years. Aggressive removal can pull clear coat or even colour coat with it.
Application temperature is a practical consideration too. Vinyl bonds best when the surface is above around 10 degrees Celsius. On a cold day in Ely, working in a garage or sheltered area rather than outside in the open is preferable. If we have concerns about conditions on the day, we will discuss that with you.
How long cut vinyl lettering takes to apply depends on how much of the van it covers once the surface is prepared. Printed panel graphics or more complex designs take longer. The vinyl is applied using a squeegee technique to push out air and ensure full contact with the paint surface.
Curves and bodywork features such as wheel arch lips, door edges and riveted panels require care. Cast vinyl film (the quality grade used for vehicle signwriting that needs to last) can be stretched and conformed to compound curves without cracking or lifting later. Calendered film is less forgiving in these areas and more prone to lifting over time.
Post-heat is applied after the graphics are down. A heat gun is used to relax the film into any surface contours and activate the adhesive fully. This step is particularly important on any area where the film has been stretched around a curve. Skipping it is a common cause of premature edge lifting.
Once the application is complete, we inspect every panel before packing up. We are looking for any lift at edges, any bubbles that need to be worked out, and checking that the finished result matches the approved design. If anything is not right, we address it on the spot.
You should do your own inspection too before we leave. Walk around the van in good light. Check the text reads correctly on both sides, that the rear is straight and clean, and that any logo detail has reproduced as expected. This is the right moment to raise anything - not three days later.
Freshly applied vinyl benefits from being left without washing for at least 48 hours to allow the adhesive to cure fully. After that, hand washing is fine. High-pressure jet washing directly at seams and edges is best avoided, as is automatic car washing with rotating brush systems - both can lift edges over time.
Fuel and oil splashes should be wiped off promptly rather than left to soak in. Most vinyl films will resist brief contact with common trade fluids, but prolonged exposure will degrade the surface. Good general care makes a real difference to how long the finished job looks its best.
For tradespeople in Ely who cannot be without their van, talk to us about timing when you book. Where design approval is handled quickly beforehand, the timing of a cut vinyl signwriting job on a single van is easier to plan. We carry out the work at your premises, so the van does not have to travel anywhere - which minimises your downtime.
Call us to talk through what you need and we will plan the job around you.
Also available
We design, print and fit full or partial van wraps in Cambridge, working at your premises so your vehicle never leaves your site.
See detailsWe wrap commercial vehicles of all types in Cambridge, designing and printing everything in-house and fitting at your site.
See detailsWe brand entire fleets of commercial vehicles in Cambridge with consistent, professionally printed graphics, designing and fitting everything…
See detailsLet us know what needs branding and we will send a design and price to look over.