If your van is running around Cambourne unmarked or with signwriting that's starting to look tired, van graphics are one of the most cost-effective ways to turn a plain vehicle into a moving advertisement for your business.
Van graphics combine printed panels, colour blocks and text applied directly to your vehicle's paintwork. Unlike a full wrap, graphics typically cover key panels - the sides, rear doors and sometimes the bonnet - leaving some of the original paint showing. The result is a bold, designed look that stands out far more than plain lettering on its own.
We design and print van graphics in-house, then come to you. The installation is done at your premises or wherever your vehicle is kept, so you don't need to drop the van off or arrange alternative transport for a day.
Most van graphics don't fail overnight. The deterioration is gradual, which means it's easy to miss until the damage looks bad enough to put customers off. Knowing what to look for means you can act before the van starts working against you rather than for you.
This is one of the first signs that a graphic is reaching the end of its life. The edges - particularly around door handles, wheel arches, panel seams and anywhere the vinyl has been cut - begin to lift away from the paintwork. Once an edge lifts, water and dirt get underneath and the problem spreads faster. A graphic lifting at the edges on a relatively new installation usually points to poor surface preparation before fitting, not material failure.
Proper surface prep matters. The panel needs to be clean of any grease, wax or silicone before the vinyl goes on. Skipping or rushing that step is the single most common reason graphics fail early.
Printed graphics are exposed to UV light every day. Over time, colours fade and - in cheaper print runs - can shift noticeably. Reds tend to fade faster than blues and blacks. If your van's graphics look washed out or the colours no longer match your brand, that's a sign the print has degraded. The practical question is whether a refresh is worth it now or whether you wait until the next vehicle change. If the van still has several years of life in it, refreshing the graphics is almost always worth doing.
Bubbles under the surface of a graphic usually appear because air was trapped during installation, or because moisture has got under the film after an edge lifted. Small bubbles sometimes settle over time in warm conditions, but larger ones won't. Silvering - where the graphic takes on a metallic or misty appearance - is a sign that the adhesive has failed across a wider area. Neither is a surface-only problem; both mean the graphic needs to be removed and replaced rather than patched.
Vinyl becomes less flexible with age. Older graphics - especially on vehicles that have been parked outside in all weathers - can crack across the face of the film, particularly around curves, door hinges and panel folds. Once the film starts cracking, the printed image breaks up and the van looks neglected regardless of how well the business itself is run. Cracking usually means the graphic has gone beyond its useful life and needs full removal before new graphics go on.
If a previous graphic was removed without the right tools or technique, it can leave adhesive residue, faint outlines or even shadow marks in the original paint. These don't show up on a plain van but become obvious once new graphics go on. We offer graphic removal as a separate service, and proper removal - taking the time to clear the residue - makes a real difference to how cleanly the next graphic sits.
Understanding the causes helps you ask the right questions before you commission any graphics work - whoever you use.
Patching a graphic is rarely a good solution. Even if the colour match is close, the sheen and texture of aged and new vinyl are different, and the repair tends to be visible in most lighting conditions. If lifting or bubbling affects more than a small corner of a panel, replacing the whole panel graphic usually gives a cleaner result at a similar cost to a good patch job.
If the graphic is more than a few years old and showing multiple signs of wear, full replacement across all panels is likely better value than piecemeal repairs - particularly if you're updating your brand at the same time.
When a graphic is fitted correctly, edges sit flat to the panel with no lifting or bubbling. Colours are consistent across panels. The print has sharp detail, not a pixelated or blurry look - which is a sign of low-resolution artwork going to print. Any joins between panels are planned around natural panel breaks so they're as invisible as possible.
Ask to see recent examples of finished vehicles before you commit. The quality of the finish is the clearest indicator of whether the work is being done properly.
Quality depends on control from artwork to finished panel, so ask who designs and prints the graphics. We come to you - the work is done at your location, whether that's a yard, a driveway or a commercial unit. There's no need to drop the van off.
If you've noticed any of the warning signs above on your current graphics, or if your van is still running completely unmarked, call us to talk through what's involved. We'll give you a straight answer on what the job needs and what it will cost.
Also available
We design, print and fit full or partial van wraps in Cambridge, working at your premises so your vehicle never leaves your site.
See detailsWe wrap commercial vehicles of all types in Cambridge, designing and printing everything in-house and fitting at your site.
See detailsWe brand entire fleets of commercial vehicles in Cambridge with consistent, professionally printed graphics, designing and fitting everything…
See detailsLet us know what needs branding and we will send a design and price to look over.