Covering Cambridge and the surrounding area Monday to Friday 9:00am - 5:00pm Get a quote

Part Wraps in Ely - What Happens From First Contact to Finished Van

If you've never had a van wrapped before, here's exactly what the process looks like for part wraps in Ely, from the first conversation through to the job being done and cleared up.

5.0 from 9 Google reviews Est. 2020 A written quote up front Mock-up on your vehicle type first We bring the fitting to you

Step One - Working Out What You Actually Need

The first conversation is about understanding what you're trying to achieve, not selling you the most expensive option. We'll ask which panels you want to cover, what your existing branding looks like, whether you have print-ready artwork or need a design built from scratch, and what condition the panels are in.

It helps at this stage if you can tell us the make, model and year of the van. Panel shapes and sizes vary between manufacturers and between generations of the same model. A Transit Connect and a Transit Custom might look similar, but the rear door dimensions and the way the panels curve are different enough that artwork needs to be set up for the specific vehicle rather than a generic template.

If you've got existing graphics that need to come off first, tell us at this point. We offer removal as part of the service, and knowing about it upfront means we can allow the right amount of time for the job.

Step Two - Artwork and Design

We design and print in-house. For customers who already have brand guidelines - a logo file, specific colour references, a font - we work from those. For customers who need a design built from the ground up, we can put something together based on your trade, the information you need on the van and the look you're after.

Artwork for vehicle graphics needs to be set up at the correct size and resolution for large-format print. A logo that works on a business card or letterhead may not be in a format that prints cleanly at door panel size. If your existing files are low resolution, we'll flag this before anything goes to print. It's far better to sort the artwork out at this stage than to discover the problem after the job is done.

We'll produce a visual for you to approve before anything is printed. The visual shows how the design will sit on the panel, including any curves or recesses in the bodywork, so you can see roughly how the finished job will look. This is the stage to request changes - once print has started, the material is committed.

Step Three - Print

Once artwork is approved, we print in-house on cast vinyl film using wide-format digital printing. Cast film is thinner and more flexible than the calendered alternatives, which means it conforms properly to the curves and recesses of a van body rather than bridging across them or lifting at the edges.

Printed panels are laminated after printing. The laminate protects the inks from UV exposure, fuel, bird droppings and surface abrasion. It also determines the final surface finish - gloss, satin or matt - so the choice of overlaminate is part of the finish decision. We don't skip the laminate to cut costs.

Print and lamination typically take place between artwork approval and the fitting appointment. Having print in-house means we're not waiting on an external supplier to turn around the material, which keeps the process moving.

Step Four - Preparing the Vehicle

This is the stage that makes or breaks the longevity of a part wrap, and it's where a lot of cheap jobs fall apart.

We come to your premises in Ely or wherever the vehicle is located. Before any vinyl goes near the panel, the surface needs to be thoroughly cleaned. Traffic film, grease, silicone from polishes and even traces left by hand contact can all prevent the adhesive from bonding properly. We clean the panel with an appropriate solvent-based cleaner, not just soap and water.

The panel temperature also matters. Vinyl adhesive doesn't bond well on very cold metal. If the van has been sitting outside overnight in winter, the panel needs to be brought up to a suitable temperature before fitting begins. Working on a cold panel and expecting the vinyl to bond is a common cause of early edge lifting.

Any existing graphics that need to come off are removed at this stage. Removal needs to be done carefully to avoid lifting paint or leaving adhesive residue. Heat is used to soften old vinyl before it's peeled back. Residue is then cleaned off with an appropriate product. If the paint underneath is in poor condition - chips, corrosion or uneven repairs - this is the point where it becomes visible and you need to decide whether to have paintwork attended to before the new vinyl goes on.

Step Five - Fitting

Fitting a part wrap is a skilled job that looks straightforward until you try to do it yourself. The vinyl needs to be positioned correctly on the panel before the adhesive is fully committed, which involves a wet or dry application technique depending on the size of the piece and the complexity of the panel shape.

Large panels are usually applied wet - a small amount of application fluid allows the film to be repositioned before it's squeegeed down. This is particularly important for wide rear door panels or full side panels where any misalignment would be immediately obvious.

Once positioned and squeegeed flat, any recesses and curves need to be worked with heat. A heat gun softens the vinyl so it can be stretched and moulded into the shape of the bodywork without lifting or bridging. Getting this right around door handles, hinges and panel edges takes time and experience. Rushing it - or skipping the heat work - is why wraps peel away from recesses within months on badly done jobs.

Edges are trimmed and tucked where possible. Wrapping edges around door shuts or folding them under a panel edge gives a neater finish and protects the edge of the vinyl from being caught and lifted during normal use.

Step Six - Final Check and Clean-Up

Once the vinyl is down, we go over the whole panel checking for bubbles, lifted edges and any areas where the film hasn't conformed properly to the bodywork. Small bubbles that are trapped air rather than contamination can usually be worked out through the film at this stage. Any that can't be removed by hand are pierced with a fine needle and pressed flat.

We clean up any application fluid residue and wipe down the panel. We'll also talk you through how to care for the wrap - what cleaning methods are safe, what to avoid, and how to handle minor edge lifts if they appear after the first few weeks.

The finished job is checked in proper light before we leave. If something isn't right, we sort it on the spot rather than leaving and hoping you don't notice.

How Long Does the Whole Process Take?

The timeline depends mainly on the artwork stage. If you have print-ready artwork and a clear brief, the design-to-fitting process can move quickly. If the design needs building from scratch or requires several rounds of changes, that stage takes longer. Fitting itself - once the material is printed and the vehicle is prepared - depends on how many panels are involved and how complex the work is.

We'll give you a realistic timeline when we discuss the job, not an optimistic one that slips. The van being unavailable for any length of time is an inconvenience, so it's worth knowing upfront what to expect.

Ready to Get Started?

We come to you in Ely. Call us to talk through what you need and we'll take it from there, step by step.

Working with us in Ely

  • Design and print both done by us, not sent out.
  • Old lettering or wraps removed first, if needed.
  • Fleet work in Ely split into stages.
  • Artwork stored, ready for your next vehicle.

Part Wraps in Ely?

Let us know what needs branding and we will send a design and price to look over.

Call Quote