Here is exactly what happens when you book minibus graphics in Ely - from the first conversation through to the finished vehicle back in your yard.
The first conversation is not a sales call. It is a practical exchange about your vehicle, your operation and what the graphics need to do. We ask about the make and model of the minibus, its age and current paint condition, what you use it for, and whether you have existing brand guidelines or artwork we need to follow.
These details matter. A vehicle with repaired or resprayed panels needs a different approach than one with original paintwork throughout. A care provider carrying vulnerable adults needs clear identification on the vehicle; a private hire operator may want something more understated. Getting this right at the start saves time and cost later.
We come to you in Ely - all work is carried out at your premises, your yard or wherever the vehicle is based. You do not need to deliver it anywhere.
Before any design work is committed to print, the vehicle itself needs to be assessed in person. This is not about criticising the condition of your fleet - it is about catching anything that will affect the finished result. Things we look for at this stage include:
If there are issues that need sorting before we can wrap - body repairs, rust treatment - we will tell you plainly at this stage. Wrapping over a problem does not hide it; it usually makes it more obvious over time.
We produce all design work in-house. If you have an existing logo, brand colours and artwork files, we work with those. If you are starting from scratch or the existing artwork is not in a format suitable for large-format print, we will work with you to develop something that functions correctly at vehicle scale.
Artwork for vehicle graphics needs to be supplied at the correct resolution. A logo that looks fine on a letterhead or website will often be unusable at minibus scale - too low in resolution to print sharply at the size needed. It is worth checking which formats are workable before you start.
The design is laid out as a vehicle template showing exactly where each graphic element sits on the actual panels. You review and approve this before anything goes to print. Changes at design stage cost time but nothing else; changes after printing are a different matter, so we do not rush this step.
Once the design is signed off, it goes to print in our own facility. We use cast vinyl film, which is the correct specification for vehicle bodywork - it conforms to curves and recesses far better than the cheaper calendered alternatives. The printed surface is then laminated to protect the inks from UV, road chemicals and abrasion.
Printing is done to your approval colours. Where brand standards specify particular colour references, we calibrate accordingly. Because design and print are both in-house, there is no handover between suppliers where things can be lost or misinterpreted.
The printed panels are cut to shape and prepared for installation. For a full wrap this involves preparing the film for every section of the vehicle - including the more complex areas around the wheel arches, sliding door frames and rear corners. These sections require cast film specifically because of the degree of stretch involved.
This is the step that most determines how the finished wrap performs and lasts. The vehicle's surface must be completely clean of any wax, silicone, road film, bird lime, or contamination of any kind. These act as a barrier between the film adhesive and the paint, and even small amounts will cause localised lifting over time.
Preparation involves thorough washing, then a panel-wipe with an appropriate cleaner, working section by section. Any existing graphics or stickers need to be removed before this stage. Old adhesive residue left on the panel will cause raised areas under the new film and must be cleared fully.
Surface temperature matters too. Vinyl application in cold conditions can compromise adhesion; in very hot direct sunlight, the film moves too fast to position accurately. We manage this by working in appropriate conditions or adjusting timing where possible. When the work is being done at your premises in Ely, having the vehicle in a covered or shaded area during application makes a real difference to the finished result.
The film goes on panel by panel, starting with the largest flat sections and working toward the more complex areas. Each section is positioned, tacked in place, then squeegeed down from the centre outward to push out any air. The edges are wrapped around and bonded to the panel returns.
Curves and recesses require the film to be heated and stretched to conform properly. This is where experience and the right film specification matter most. A cheap calendered film applied to a curved arch or a door recess will not stretch evenly; it will wrinkle or lift. Cast film stretches uniformly and holds its shape once bonded.
Joints between sections are planned into the design and laid along natural panel breaks wherever possible. A well-planned seam is almost invisible; a poorly placed one draws the eye. On a minibus, the main seam positions are typically along the roof gutter, the waistline and the door pillars.
Once all panels are applied, every edge is gone over again. Any area that has lifted or not bonded fully is re-heated and pressed down. All cut edges are sealed. The vehicle is then inspected in full daylight, working around the bodywork panel by panel.
Any area that does not meet the required standard is corrected before we sign off. Post-installation, the adhesive continues to bond over the following 24 to 48 hours; the vehicle can be used immediately but should not be jet-washed right away - waiting a few days before the first pressure wash lets the edges bond fully.
When the job is done and inspected, we walk you through the vehicle and hand it back. We also give you straightforward advice on how to maintain the graphics - what to avoid, how to wash the vehicle correctly to protect the film edges, and what to do if you notice a section starting to lift.
We come to you throughout this entire process. If you are based in Ely and want to talk through the job on your vehicle, call us and we will arrange a visit at a time that suits your operation.
Also available
We design, print and fit full or partial van wraps in Cambridge, working at your premises so your vehicle never leaves your site.
See detailsWe wrap commercial vehicles of all types in Cambridge, designing and printing everything in-house and fitting at your site.
See detailsWe brand entire fleets of commercial vehicles in Cambridge with consistent, professionally printed graphics, designing and fitting everything…
See detailsLet us know what needs branding and we will send a design and price to look over.