If you're arranging HGV graphics for the first time, or switching supplier, knowing exactly what should happen and when helps you plan around your vehicles and avoid any surprises.
Every HGV graphics job starts with the vehicle itself. Before any design work or printing happens, the body type, dimensions and condition of the vehicle need to be confirmed. For a curtainsider, that means the curtain dimensions, the position of the buckle straps and tension rails, and whether the curtain is factory-white or already coloured. For a rigid box van, it means noting the rivet pattern, any panel joins, and the condition of the existing paintwork or livery. For a flatbed, the main surfaces available for graphics - usually the cab doors and headboard - need to be measured accurately.
Photographs of the vehicle, taken from each side, the rear and the front, are helpful at this stage. If we're coming to you in Ely, we'll do this in person; if the vehicle is already in Cambridge, the same process applies. The point is that design cannot be done accurately from guesswork - the layout needs to be built around the actual template of your vehicle's body.
At this stage, you should also confirm any existing branding guidelines. If your business has a set font, specific brand colours specified in Pantone or CMYK values, or a logo file, those need to be provided in a usable format. A low-resolution logo from a website is rarely suitable for large-format print. Vector files or high-resolution artwork at the correct scale are what's needed. If you don't have those, we can advise on what's possible.
HGV graphics are not simply a large version of your business card. What reads clearly on a screen at arm's length needs to be rethought for a panel that will be read at 50 metres from a moving vehicle. Text needs to be large enough to absorb in a glance. Contact details - phone number, website, service description - need to be in a size and position where they're legible from the side of the road.
A good designer working on HGV livery will also account for the physical breaks in the vehicle's surface. On a curtainsider, the buckle straps divide the curtain into sections. A design that ignores those straps will look chopped up once it's on the vehicle. On a riveted box body, a design that runs fine details through a rivet field will be illegible at that area once applied. The artwork needs to be built around the template of the actual vehicle body, with those breaks and interruptions treated as part of the design rather than obstacles.
Once the design is agreed, you should receive a visual showing how it will look on each side and the rear before anything goes to print. Changes at this stage cost time but no material. Changes after printing waste material and delay the job, so it's worth being thorough at the proof stage.
Van Wrapping Cambridge designs and prints in-house. That means the artwork going to the printer is the same file that was signed off at proof stage - there's no handoff to a third party where something can be lost in translation. Large-format printing for HGV graphics uses solvent or latex-based inks on a wide-format roll-fed printer. The output is then laminated to protect the ink layer before cutting and weeding.
Print times vary with the size of the job and what else is in the queue. If the job requires a specific finish - matt laminate, anti-graffiti coating or similar - that may add time. It's worth asking at the quote stage what the lead time is from artwork approval to fitting, so you can plan the vehicle's availability accordingly.
The surface that graphics go onto needs to be completely clean, dry and free of contamination. Silicone, wax, oil, old adhesive residue and even fingerprints will prevent the vinyl from bonding correctly. If you're having an existing livery removed first, there will be adhesive residue to deal with - that needs to come off fully before any new material goes on.
Temperature matters. Vinyl film needs a surface temperature of roughly 10-15°C or above to bond and conform properly. In winter, that may mean the vehicle needs to be in a heated workshop or bay for a period before fitting begins. Applying graphics in a cold, damp environment outdoors in January is a route to premature failure. If you're planning a fleet re-livery in winter, factor in whether you have a suitable indoor space or whether the job needs to be scheduled around reasonable weather.
If the vehicle has previously been resprayed or has paint repairs, those areas need to be checked. Fresh paint needs time to fully cure before vinyl goes on top - typically at least a month for a standard air-dry finish, longer for some formulations. Graphics applied over uncured paint will lift, taking the paint with them when removed.
We come to you - the work is done at your premises in Ely or wherever the vehicle is based. For a single-vehicle panel graphic job on a curtainsider or rigid box van, the time needed depends on the size and layout of the panels. A full wrap on a large vehicle generally takes longer than a panel job, and the time depends on the cab complexity and body type.
During fitting, the vehicle needs to be accessible from all sides. That means it shouldn't be parked against a wall or in a tight bay for the duration. A fitter working on a curtainsider needs to be able to walk the full length of each side without obstruction, and needs access to the top rail area of the curtain. For taller rigid bodies, working at height may be needed - a step ladder or platform is typically sufficient but needs to be factored into the working space.
The process itself involves cleaning each panel immediately before application, applying the material in sections, using heat to conform it around any curves, rivets or body features, and then carefully pressing out any air. Rivets on a box body each need to be individually worked - the material is pressed into the recess around each rivet head to ensure full contact and prevent edge lifting later. This takes time but is what separates a graphic that lasts from one that starts to peel within months.
Doors and cab features are fitted last, once the main body panels are done. The junctions between panels - where two sections of material meet at a seam or overlap - need to be positioned at natural body lines where possible, so they're less visible and less prone to catching wind.
Fresh graphics need time for the adhesive to fully cure. For the first 48 to 72 hours after fitting, the vehicle should not go through a pressure washer or automated wash facility. Normal driving is fine, but contact with high-pressure water before the adhesive has cured risks lifting edges that would otherwise have bonded properly.
Once cured, the main maintenance rule is to wash graphics with low-pressure water and a soft brush or cloth. Pressure lance washing directly at panel edges - particularly at the top and bottom edges of a curtain graphic, or around door frames - is the most common cause of premature edge lifting in service. If your vehicles go through a truck wash regularly, it's worth making the facility aware of where the graphics edges are.
Any lifting edges spotted early should be addressed quickly. A small lift caught early can often be re-adhered with heat. Left to grow, it becomes a larger repair or an early replacement.
When a graphic reaches the end of its life or your livery changes, removal is as important as the original application. Van Wrapping Cambridge offers removal as a standalone service. Done properly with heat and the correct tools, the material comes away cleanly and adhesive residue is removed without damaging the underlying paint. That leaves the vehicle ready for the next application.
To book a site visit in Ely or to get the process started, call Van Wrapping Cambridge.
Also available
We design, print and fit full or partial van wraps in Cambridge, working at your premises so your vehicle never leaves your site.
See detailsWe wrap commercial vehicles of all types in Cambridge, designing and printing everything in-house and fitting at your site.
See detailsWe brand entire fleets of commercial vehicles in Cambridge with consistent, professionally printed graphics, designing and fitting everything…
See detailsLet us know what needs branding and we will send a design and price to look over.