If your lorry or HGV is running blank sides and an unmarked cab, you are missing the most cost-effective advertising your business has - Van Wrapping Cambridge designs, prints and fits full HGV graphics at your premises in and around Cambourne.
Most fleet owners do not act on vehicle graphics until a truck looks embarrassing or a customer comments on it. By that point the opportunity cost has been running for months. There are earlier, clearer signals that your current graphics - or lack of them - are actively working against you.
Here are the warning signs worth taking seriously:
Understanding why graphics fail helps you ask better questions before you commission new work - and helps you avoid making the same mistakes again.
Wrong material for the application. There is a significant difference between the grades of calendered and cast vinyl used in vehicle graphics. Cheaper calendered films are thicker, less conformable and have a memory - meaning they want to return to their flat state. On a flat-sided box van this matters less. On a curtainsider with rivets, corrugations and joins, a calendered film will lift and tunnel within a year or two. Cast films are thinner, more stable and conform properly around rivets and compound curves. If a previous installer used an economy film on your curtainsider, that is almost certainly why it is peeling.
Poor surface preparation. Vinyl needs a clean, degreased surface to bond correctly. Road film, silicone from wax treatments, and residue from previous adhesive all compromise adhesion. Proper prep takes time - it is one of the places where a cheap job cuts corners first, and the failure shows up six months later when the edges start to lift.
No heat finishing on edges and rivets. Vinyl around rivets and panel edges needs to be worked in with heat and a squeegee to push the film into every recess. Without this, air pockets form at every rivet head. Those pockets hold moisture, and in cold weather the freeze-thaw cycle forces the film away from the surface.
Ink quality and lamination. Digitally printed graphics need a protective laminate over the print layer. Without it, UV exposure breaks down the ink within a year or two and colours fade badly. A laminate both protects the ink and adds durability to the surface of the film. Graphics that fade fast were either not laminated or were laminated with an inadequate product.
Age and mileage. Even correctly installed, high-quality graphics on a working HGV have a finite life. A truck covering long motorway miles is exposed to far more UV, rain, motorway wash, pressure washing and temperature cycling than a local delivery van. Plan for this when budgeting.
We design and print everything in-house, which means the artwork, the colour output and the material choice are all under our control from start to finish. There is no handoff between a print supplier and a fitter where things get lost or changed.
Because we travel to you and work at your premises, there is no need to bring your vehicle to a workshop. For operators running tight delivery schedules around Cambourne and across Cambridgeshire, that matters. We fit around your fleet's availability rather than the other way around.
The process for a full HGV graphic installation typically runs like this:
For a full-wrap or large-format graphic on an HGV, UK prices typically range from around £1,500 to £4,000 or more depending on vehicle size, panel complexity and the volume of print involved. A rigid box truck with flat sides costs less to cover than a curtainsider with rivets, because the curtainsider demands more material, more fitting time and a more conformable film to get a durable result.
Partial graphics - a branded rear door, a full cab front, or large-format side panels on the trailer only - cost less and can still deliver strong brand impact. They are worth considering if you are running a large fleet and need to bring vehicles into brand identity in stages.
Wrap removal is also available if you are rebranding, returning a leased vehicle or selling a truck and need clean panels. Proper removal using heat to avoid adhesive residue and paint damage is a job in its own right - do not let anyone pull cold vinyl off a painted surface.
Ask what grade of film will be used and why it is right for your vehicle type. Ask whether the print will be laminated and what the laminate is for. Ask to see examples of work on curtainsiders specifically if that is what you are running - flat-sided box vans are easier, and not every installer has experience with the rivet and seam work that curtainsiders demand. Ask where the design and print work is done - in-house production means faster turnaround and better control over quality.
Ask whether the installer is insured for the work they carry out, so that your vehicles and premises are covered while they are on site.
If your trucks are running unmarked or your current graphics are showing any of the signs above, call us to talk through what your fleet needs. We will tell you honestly what is worth doing and what can wait.
Also available
We design, print and fit full or partial van wraps in Cambridge, working at your premises so your vehicle never leaves your site.
See detailsWe wrap commercial vehicles of all types in Cambridge, designing and printing everything in-house and fitting at your site.
See detailsWe brand entire fleets of commercial vehicles in Cambridge with consistent, professionally printed graphics, designing and fitting everything…
See detailsLet us know what needs branding and we will send a design and price to look over.