If your lorry or HGV is out on the road around Haverhill with faded, peeling or tired-looking graphics, it's doing your business more harm than good.
Every time one of your vehicles pulls into a customer's yard or sits at a junction, people are reading it. If the graphics look neglected, that's the impression your business leaves. Fleet graphics on lorries and HGVs aren't just branding - they're a constant, silent pitch to everyone who sees the vehicle. When they start to fail, that pitch turns negative.
The good news is that most problems with HGV graphics show clear warning signs before they become serious. Catching them early means you avoid the worst outcomes: substrate damage, adhesive ghosting on paintwork, or a vehicle that simply looks unprofessional at exactly the wrong moment.
The most obvious sign is edge lifting. This is where the vinyl starts to peel away from the panel at the corners, door edges or around rivets on a curtainsider. A small lift catches wind at motorway speed and can rip a panel in minutes. If you see edges starting to curl, that graphic needs attention now, not next month.
Colour fade is a slower problem but just as damaging to your brand. Printed graphics use UV-resistant inks, but all printed colour fades over time. If the driver's side of a vehicle looks noticeably different in colour from the kerb side, that's a sign the material has reached the end of its useful life. The two sides of an HGV receive very different levels of sun exposure, and the difference in fade is a reliable indicator of overall age.
Bubbling or blistering under the surface of a graphic usually means one of two things: either the original application wasn't done correctly and air was trapped during fitting, or moisture has worked its way in through a compromised edge. Either way, bubbles expand and contract with temperature changes. Left alone, they stress the surrounding material and cause it to tear or delaminate further.
Cracking or crazing in the printed surface - where you can see fine lines running across the graphic - means the vinyl film has hardened and lost its flexibility. This is particularly common on flat, exposed panels that face forward into wind and rain. Once a film cracks, water gets in behind it and the graphic is finished.
Print that looks cloudy, milky or washed out, even where the material hasn't yet lifted, is a sign that the laminate protecting the printed ink has degraded. The laminate is what gives the colour its depth and protects it from fuel splash, cleaning chemicals and road grime. When it fails, the print underneath degrades rapidly.
Age is the most straightforward cause. Vinyl films applied to HGVs are designed for hard outdoor use, but they don't last forever. A typical high-quality printed graphic on a lorry will give you several years of decent appearance, but the exact lifespan depends on how the vehicle is used, where it's parked, and how it's washed.
Pressure washing is one of the biggest causes of premature edge lifting. A lance held too close to a panel edge, or angled under a graphic, will force water behind the vinyl faster than you'd think. Fleet washing facilities that use high-pressure automated systems can accelerate the problem. The safe approach is to wash graphics with low-pressure water and a soft brush, keeping lances away from edges and seams.
Poor original preparation is another common root cause. Graphics applied to panels with old wax, silicone, contamination or existing adhesive residue will never bond properly. The surface needs to be fully decontaminated and the temperature needs to be right at the time of fitting - below around 10°C, vinyl stiffens and doesn't conform properly to curves or rivets, and the adhesive won't activate correctly. Any application done in cold, damp conditions on an inadequately prepared surface will fail sooner than it should.
Curtainsider bodies present their own challenges. The fabric itself moves as the curtain is opened and closed, and the top rail, straps and buckle areas all create stress points where graphics are more likely to lift or tear. Graphics on curtainsiders need to be cut to allow for that movement - rigid full-panel prints that don't account for the curtain structure will fail at the stress points first.
Riveted box bodies accumulate dirt around each rivet head, and those same rivets create dozens of small edge-lift opportunities. Each rivet needs to be properly picked out and re-sealed during application. If that work was rushed or skipped, the rivets become the first points of failure.
If edge lifting is localised to one panel and the rest of the graphic is sound, a targeted repair is sometimes practical. But if lifting is appearing in multiple places, or if the colour has faded significantly, a full replacement is almost always better value. Patching a graphic that's failing across the board produces a vehicle that looks patchwork and unprofessional - which defeats the whole point.
Before any new graphics go on, the old ones need to come off cleanly. Adhesive residue left on the panel will prevent the new graphic from bonding properly, and old adhesive ghosting through fresh print looks poor. Proper removal using heat and the right tools is as important as the application itself.
Van Wrapping Cambridge designs and prints in-house, and comes to you - the work is done at your premises or wherever your vehicles are based. For businesses running vehicles around Haverhill and across south Cambridgeshire, that means no need to bring trucks into Cambridge.
We work on curtainsiders, rigid box vans, flatbeds and full articulated lorries. If you've noticed any of the warning signs described above on your fleet, call us to arrange a look - we'll give you a straight assessment of what needs doing and what it'll cost.
Call Van Wrapping Cambridge to book a vehicle inspection for your Haverhill fleet.
Also available
We design, print and fit full or partial van wraps in Cambridge, working at your premises so your vehicle never leaves your site.
See detailsWe wrap commercial vehicles of all types in Cambridge, designing and printing everything in-house and fitting at your site.
See detailsWe brand entire fleets of commercial vehicles in Cambridge with consistent, professionally printed graphics, designing and fitting everything…
See detailsLet us know what needs branding and we will send a design and price to look over.