If you are budgeting for a full van wrap in Royston, Van Wrapping Cambridge can give you a straight answer on costs once we know the van and what you need.
Full van wrap prices vary considerably depending on van size, design complexity, the material specified and what access or preparation the vehicle needs. As a broad guide, a full printed wrap on a standard panel van in the UK currently ranges from around £1,500 to £3,000 or more for larger or more complex vehicles. High-roof long-wheelbase vans at the top of the range, with complex graphics, sit toward or above the top of that range. Simple two-colour designs on a compact van can sit toward the lower end.
These are not arbitrary figures - they reflect the genuine cost of wide-format print materials, laminate film, the labour to fit a full wrap correctly and, in our case, the design work done in-house. A quote significantly below the bottom of that range should prompt questions about what is included, particularly whether a laminate is fitted over the print and what grade of film is being used.
The surface area of the vehicle directly determines how much film and print material is needed, and how long the installation takes. A compact van such as a short-wheelbase Vauxhall Combo or Citroen Berlingo has roughly half the panel area of a high-roof long-wheelbase Sprinter or Transit. That difference translates directly to material cost and installation time.
If you are unsure which category your van falls into, give us the make, model and variant when you call and we can confirm straight away.
A simple design with flat areas of colour, a logo and contact details costs less to produce than a design with photographic imagery, full-bleed gradients, multiple overlapping elements or bespoke illustration. The design work takes longer, the print file is more complex and the colour management at print stage requires more attention.
That said, design complexity has less impact on the final price than van size does. A well-executed simple design on a large van will cost more than a complex design on a small one. It is worth knowing this before you decide to simplify your artwork to save money - the saving is smaller than most people expect.
We produce all design in-house. This matters for cost as well as quality: there is no external design agency adding their margin, and because the designer and the printer are the same operation, the colour profile from screen to finished print is consistent.
Cast film costs more than calendered film. For a full van wrap the difference is worth paying - cast film conforms properly to curves and recesses, sits flatter over time and removes more cleanly. Using a cheaper calendered film on a full wrap can produce a satisfactory result on a flat-sided van but will cause lifting and edge problems on most modern vans with sculpted bodywork.
Specialist finishes - matte, satin, metallic-effect, chrome-effect - add cost over standard gloss, partly because the base material is more expensive and partly because some finishes are less forgiving to install and require more time. Matte and satin are a modest uplift. Chrome-effect film is significantly more expensive both to supply and to install, and is rarely the right choice for a trade vehicle that needs to look professional in all conditions.
Laminate is not optional on a printed wrap. It is part of the job, not an add-on. Any quote that lists lamination separately as an extra should be treated with caution.
A van in good condition with clean, sound paintwork costs less to prepare than one with heavily contaminated panels, old wrap adhesive residue, paint damage or previous body repairs that need attention before the film is applied. We carry out thorough decontamination as standard, but if a van needs additional work - paint correction, removal of an old wrap, addressing raised body filler - this will be discussed and costed separately before any work begins.
Wrap removal, if you are having an existing livery taken off before the new wrap goes on, is a separate cost. We offer removal as a standalone service or as part of a re-wrap package. The cost depends on the age and condition of the existing film - older wraps that have degraded are more time-consuming to remove cleanly.
We come to you. The work is done at your premises in Royston, so you are not paying for transport of your van to a workshop, and you are not without your vehicle for days while it sits in a queue.
Because we design and print in-house, you are not paying for a middleman between the design studio and the production. What you approve on proof is what gets printed and fitted.
To give you a firm price rather than a broad range, we need: the van make, model, year and body variant; what your design involves (or whether you need us to design from scratch); and whether there is an existing wrap to remove. With those details, we can quote specifically rather than estimating.
Call us to discuss a full van wrap in Royston and we will give you a clear breakdown of what the job involves and what it will cost.
Also available
We design, print and fit full or partial van wraps in Cambridge, working at your premises so your vehicle never leaves your site.
See detailsWe wrap commercial vehicles of all types in Cambridge, designing and printing everything in-house and fitting at your site.
See detailsWe brand entire fleets of commercial vehicles in Cambridge with consistent, professionally printed graphics, designing and fitting everything…
See detailsLet us know what needs branding and we will send a design and price to look over.