Covering Cambridge and the surrounding area Monday to Friday 9:00am - 5:00pm Get a quote

Fleet Wrapping and Branding in Royston

Understanding what fleet wrapping costs in and around Royston - and what genuinely affects the price - helps you plan your budget and avoid paying for things you do not need.

5.0 from 9 Google reviews Est. 2020 A written quote up front Mock-up on your vehicle type first We bring the fitting to you

What Fleet Wrapping Actually Costs

Fleet wrapping costs vary considerably depending on the size of the vehicles, the complexity of the design, the type of graphics chosen and the number of vehicles involved. There is no single figure that covers all jobs, but the ranges below reflect typical current UK pricing and give a useful starting point for budgeting.

  • Cut vinyl lettering and logos (per vehicle): Simple text, phone number and logo on a standard van typically falls in the range of £150 to £400, depending on the amount of text and the number of panels covered.
  • Partial printed wrap (per vehicle): Printed side panels and rear on a standard panel van typically costs £400 to £900. The range depends on how much of the vehicle is covered and the complexity of the printed design.
  • Full vehicle wrap (per vehicle): A full colour-change or full printed wrap on a standard panel van typically costs £1,200 to £2,500. Larger vehicles such as Sprinter-sized vans, Lutons or longer wheelbase vehicles will cost more. Very large vehicles, HGV trailers and specialist bodywork push costs higher still.

These are starting-point figures. The actual price for your fleet depends on the specific factors described below.

Vehicle Size and Body Complexity

The single biggest driver of cost per vehicle is size. More surface area means more material and more installation time. A Transit Connect takes significantly less film and time than a long-wheelbase Transit or a Sprinter. If your Royston fleet mixes small vans with larger vehicles, expect a range of costs rather than a single per-vehicle figure.

Body complexity adds to cost too. A flat-sided panel van is straightforward to wrap. A vehicle with complex curves, deep recesses, prominent body mouldings, riveted bodywork or a stepped body profile takes more skill and time to wrap correctly. Vehicles with lots of external fittings - roof bars, side steps, external lockers - add time because each fitting edge needs to be finished carefully to avoid lifting.

Number of Vehicles: Where Fleet Pricing Comes In

Wrapping a single vehicle and wrapping a fleet of ten are very different jobs. With a fleet, the design work is done once and adapted across vehicle types, the print runs are larger and the scheduling can be planned efficiently. These factors mean the per-vehicle cost typically falls as fleet size increases.

For a Royston business looking to brand multiple vehicles, it is worth costing the fleet as a whole rather than pricing each vehicle individually. The design cost, which on a single vehicle might represent a significant proportion of the total, is spread across the fleet. If you are adding vehicles over time, it also makes sense to agree a standard livery specification upfront so that each new vehicle can be matched without redesigning from scratch.

Design Complexity and Artwork

A simple livery - white van, cut vinyl logo and contact details in a single colour - costs less than a full-colour printed design with photographic elements, gradients and bespoke illustration. The design itself takes more time to produce, the print uses more ink and the installation of a full printed wrap takes longer than applying cut graphics.

That said, a well-executed simple livery can be just as effective as a complex one. Many successful commercial fleet liveries use a base colour, a strong logo, clear contact details and nothing more. If your budget is limited, a clean and consistent cut-vinyl or simple printed livery across all your vehicles will do more for your brand than an elaborate design applied only to two of them.

We design in-house at Van Wrapping Cambridge, so there is no separate design agency fee on top of the wrap cost. Design, print and installation are handled together.

Existing Graphics: Removal Costs

If your vehicles carry existing livery that needs to come off before new graphics go on, removal adds to the cost. The amount depends on how much graphic is on the vehicle, how old it is and how the film was originally applied. Old graphics that have been on a vehicle for many years can be more time-consuming to remove cleanly, particularly if the adhesive has become stubborn with age.

Removal done correctly - with controlled heat and proper technique - should leave the paintwork undamaged. Adhesive residue after removal is cleaned off before new film goes down. If removal is rushed or done incorrectly, it can mark or damage paint, which then needs attention before wrapping can proceed. That adds further cost. It is always worth budgeting for removal as part of a rebrand rather than treating it as an afterthought.

On-Site Installation: What It Means for Your Budget

We travel to your premises in Royston and carry out the installation at your site. The cost of travel is factored into the job price, and it is worth checking that any installer you use is insured to work at your location. You do not need to arrange or pay for vehicle transport to a workshop, which on a fleet of several vehicles can be a meaningful saving - and it eliminates the disruption of having your vehicles off-site for extended periods.

Having a suitable space available at your site can also affect the job. If you have a large covered unit or workshop, installation can proceed efficiently regardless of weather. If vehicles need to be worked on outside, cold or wet conditions may require more time per vehicle. Letting us know what your site looks like helps us plan the schedule and quote accurately.

What Pushes Costs Up: A Summary

  • Larger or longer vehicles
  • Complex body shapes with deep curves, riveted panels or external fittings
  • Full printed wraps versus partial or cut-only graphics
  • Extensive existing graphics that need careful removal
  • Bespoke or complex design work
  • Vehicles with damaged paintwork that needs remedial attention before wrapping

What Keeps Costs Down Without Cutting Corners

  • A standardised livery design applied consistently across the fleet
  • Commissioning all vehicles in the fleet together rather than one at a time
  • Vehicles in good condition with no damaged panels or existing graphics
  • A simple, well-designed livery rather than a complex printed design
  • Giving us a clear brief at the start rather than changing the design after artwork is approved

Getting an Accurate Price

The best way to get a price that actually reflects your job is to tell us the specifics: what vehicles you have, how many, what the current state of the livery is, and what you want the finished result to look like. We can then give you a figure that is based on your fleet rather than a generic estimate.

If you are running a fleet in Royston and want a straight conversation about what your branding project would cost, call us and we will work through it with you properly.

Working with us in Royston

  • Design and print both done by us, not sent out.
  • Old lettering or wraps removed first, if needed.
  • Fleet work in Royston split into stages.
  • Artwork stored, ready for your next vehicle.

Fleet Wrapping and Branding in Royston?

Let us know what needs branding and we will send a design and price to look over.

Call Quote