Commercial vehicle wrapping in Royston is a genuine marketing investment, and understanding what drives the cost up or down helps you get the right job at a price that makes sense for your business.
Prices for commercial vehicle wrapping vary considerably depending on the vehicle size, the coverage chosen and the complexity of the design. As a working guide for the UK market, cut graphics on a standard panel van typically start from around £300-£500. A partial wrap on a medium van sits in the region of £600-£1,200. A full wrap on a transit-sized van generally costs between £1,500 and £3,000 or more, depending on the factors below. Larger vehicles such as minibuses or long-wheelbase vans will cost more again.
These are realistic starting figures, not guaranteed prices. Every quote needs to account for the specific vehicle, the design requirements and the coverage format. A quote that seems significantly lower than these ranges is worth scrutinising - the difference usually comes from the grade of film, the quality of preparation or whether the fitting is rushed.
The single biggest driver of cost is the size of the vehicle and the complexity of its bodywork. A short-wheelbase van with flat sides costs less to wrap than a long-wheelbase model with deep wheel-arch recesses and multiple body curves. More surface area means more film, more print time and more fitting time.
Body complexity matters because fitting film into recesses, around door handles and over curved panels takes more time and more skill than laying it onto flat surfaces. A vehicle with a lot of body detail - pronounced wheel arches, stepped side panels, prominent door frames - requires cast film that can stretch and conform to those shapes, which costs more than the calendered film that works on flat surfaces.
Specialist vehicles - refrigerated vans, dropside trucks, minibuses with complex glazing arrangements - add further fitting time because every awkward edge, rubber seal and flush-fitting window has to be dealt with individually.
What you choose to cover is one of the most controllable cost factors.
For fleet operators running several vehicles, mixing formats can help - full wraps on the most visible vehicles and cut graphics on support vans, for example. The brand reads consistently if the design is done as a set.
The grade of vinyl film used is a significant cost variable that isn't always made transparent in quotes. Cast film costs more than calendered film, and for good reason - it lasts longer, conforms better to complex shapes and holds its colour more reliably over time. Using the right film for the job isn't a luxury, it's what stops you needing the job done again in eighteen months.
Finish choice - gloss, matt or satin - is primarily a design and brand decision rather than a cost one. The laminate that determines finish is applied over the print and adds relatively little to the overall cost, so this isn't a meaningful area to cut back on.
A simple layout with a logo, a trade description and a phone number on a plain colour field is quicker to design and straightforward to print. A design with photographic imagery, complex gradients, multiple colour zones and detailed typography takes longer to design, requires more precise colour management in print, and sometimes requires more careful alignment during fitting.
Design is included as part of the job when you work with us, because we handle it in-house. That means the design is built to work at vehicle scale and to match the actual template for your van, rather than being a generic layout adapted after the fact. Getting the design right the first time avoids the cost of reprinting.
If the vehicle already has graphics on it, those need to be removed before new film goes on. We carry out professional wrap removal, and the condition of the existing graphics affects how straightforward this is. Film that has been on a vehicle for a long time, particularly in exposed conditions, can be more difficult to remove cleanly. If there's adhesive residue left by a previous job, that needs treating before anything new is applied.
Removal adds to the overall job cost but is non-negotiable if the existing graphics are there. New film applied over old film or old adhesive will not bond correctly and will fail early.
We come to you. We travel to customers in Royston and the surrounding area and carry out the work at your premises or yard. When comparing providers, check whether transport or a workshop visit is included in the price.
Because we design, print and fit in-house, there are no mark-ups between separate suppliers. You're dealing with one business throughout, which also means changes at design stage get dealt with quickly rather than being passed between different parties.
When comparing quotes, ask for a clear breakdown of what's included before work starts. If you want to know what wrapping your specific vehicle would cost, call us with the make, model and what you're looking to achieve, and we'll give you a straight answer.
Also available
We design, print and fit full or partial van wraps in Cambridge, working at your premises so your vehicle never leaves your site.
See detailsWe brand entire fleets of commercial vehicles in Cambridge with consistent, professionally printed graphics, designing and fitting everything…
See detailsA full van wrap transforms your entire vehicle into a moving advertisement for your business.
See detailsLet us know what needs branding and we will send a design and price to look over.