Getting vehicle graphics fitted in Trumpington is only half the job - what you do in the weeks and months afterwards determines how long they stay sharp and how much they cost you over time.
Most people think of vehicle graphics as a fit-and-forget job. You get the van signed, it looks great, and you get on with running the business. That is largely true, but a few simple habits in the first few days and in routine use will make a real difference to how well the graphics hold up over time. Neglect those habits and you will see lifting edges, fading and cracking far sooner than the material warrants.
We come to customers in Trumpington and the surrounding area to fit graphics, and we see the difference between vehicles that have been looked after and those that have not. Here is what that looks like in practice.
Fresh graphics need time for the adhesive to fully bond to the vehicle's surface. In the first two to three days after fitting, avoid washing the vehicle, exposing it to prolonged rain where possible, and parking it directly against walls or posts where the new edges might catch. The material itself is cured and stable, but the adhesive bond develops over those first few days and disturbing it early is one of the most common causes of premature edge lifting.
Also avoid pressure washing for at least the first week. After that point the bond is strong enough to handle normal washing, but the direction and pressure of the water still matter, as covered below.
Hand washing with a soft cloth or sponge and a mild, pH-neutral detergent is the best routine for a vehicle with graphics. It lets you control the pressure and direction of water and spot any early issues before they develop further.
Automated car washes with rotating brushes should be avoided. The brush action catches edges and pulls at seams, particularly on mirrors, door handles and panel lines. Even soft-bristle automated washes can cause problems over time. Touchless automatic washes are less damaging but still direct high-pressure water at angles that can work under edges.
If you use a pressure washer manually, keep the nozzle at least 30 centimetres from the surface and angle the water along the direction of the graphic rather than against an edge. Never direct a pressure washer directly at a seam, cutout or lifted edge.
Standard car wax and many polish products contain silicone, which degrades the adhesive bond at graphic edges over time. If you want to protect a wrapped or partially wrapped vehicle, use a product specifically formulated for vinyl-covered surfaces. Applied correctly, these help repel water and grime without attacking the material underneath.
Petrol and diesel spills at the pump should be wiped off quickly rather than left to sit. Fuel residue will soften printed vinyl over time, particularly at edges around fuel caps where wrap material often comes close to the filler.
Avoid abrasive cleaning products, rough cloths and scouring pads. Printed vinyl has a protective laminate layer, but it is not indestructible, and anything that dulls or scratches the laminate will accelerate fading in that area.
Prolonged exposure to direct sunlight accelerates colour fading on printed graphics, particularly on darker colours and saturated reds and blues. If you have the option of covered parking, use it. This is not always practical for working vans, but for a vehicle that sits on a drive or yard overnight, shade makes a measurable difference to how long the colour holds.
Frost does not damage well-applied graphics directly, but do not use an ice scraper on a wrapped panel. The scraper edge will catch seams and cutouts and can lift material that is otherwise sound. Use a de-icer spray and a soft cloth instead.
Running your hand along the edges of your graphics once a month takes about two minutes and can save you a significant repair bill. What you are feeling for is any section that has started to lift away from the surface. Edge lifting, if caught early, can often be re-bonded cleanly before the section grows. Left for several months, a small lifted corner becomes a large area of separated material that needs reprinting and refitting.
Pay particular attention to:
If you spot lifting, do not try to press it back down with your thumb and hope for the best. The adhesive on a lifted section picks up contamination quickly and will not re-bond cleanly without being cleaned and re-heated. Contact us and we can assess whether a local repair is straightforward or whether the section needs replacing.
A light scrape that breaks the surface of the vinyl but does not go through to the bodywork is often repairable without touching the paint underneath. A heavier impact that dents or creases the panel means the graphic over that area will need to come off when the bodywork is repaired. When you take a vehicle in for bodywork repairs, make sure the bodyshop knows there are graphics on the vehicle and understands that the material needs to be removed cleanly before they work on the panel and replaced afterwards. Not all bodyshops have experience with this.
If you have several vehicles or expect to add more over time, keep a record of when each vehicle's graphics were fitted. This makes it straightforward to plan ahead for rebrands or replacements rather than dealing with vehicles one by one as they deteriorate. We keep artwork files for every job we do, so reprinting for a replacement or a new vehicle later on does not require you to start the design process from scratch.
If you have graphics on vehicles in Trumpington that need a check-over, a repair or a full maintenance assessment, give us a call. We come to you, so there is no need to bring the vehicle to us. A quick inspection can tell you whether what you have will run for another few years or whether you are better off planning a replacement sooner rather than later.
Also available
We design, print and fit full or partial van wraps in Cambridge, working at your premises so your vehicle never leaves your site.
See detailsWe wrap commercial vehicles of all types in Cambridge, designing and printing everything in-house and fitting at your site.
See detailsWe brand entire fleets of commercial vehicles in Cambridge with consistent, professionally printed graphics, designing and fitting everything…
See detailsLet us know what needs branding and we will send a design and price to look over.