Choosing the right type of vehicle graphics for your car, van or fleet in Newmarket comes down to understanding your materials - so here's an honest guide to what's available and what suits different jobs.
When you get a quote for vehicle graphics, you're rarely told what film is being used or why. That's a problem, because the material affects how long the finished result looks good, how well it copes with the shape of your vehicle and how easy it is to remove later. Making an informed decision means knowing what your options are before anyone starts cutting vinyl.
Vehicle graphics in Newmarket - as anywhere - split into two broad categories: cut vinyl lettering and logos, and printed graphics (which include partial graphics and full or partial wraps). Within each category, the film type and print quality vary, and those differences have real consequences.
Cut vinyl is exactly what it sounds like. A plotter cuts lettering, logos or simple shapes directly from a coloured film, which is then applied to the vehicle panel. There's no printing involved - the colour comes from the film itself.
The main advantage is longevity. Coloured cast vinyl film, used in a good-quality cut job, holds its colour well for a long time because the colour runs through the material rather than sitting on the surface as ink. Whites stay white, reds stay red. It also sits cleanly on flat panels and gentle curves.
The limitations are design. You're working with flat colour, so if you want a gradient, a photographic image, a detailed logo or anything with multiple overlapping colours, cut vinyl alone won't do it. For tradespeople who need a phone number, a business name and a simple logo in two or three colours, it's often the most practical choice - clean, legible and straightforward to maintain.
It's also generally less expensive than printed graphics for simple designs, which makes it sensible for businesses that run several vehicles and need a consistent, readable brand across all of them without a large outlay per vehicle.
Printed vehicle graphics are produced on a wide-format printer and then applied to the vehicle. This opens up full-colour photography, complex gradients, detailed artwork and backgrounds that couldn't be achieved with cut vinyl alone. For businesses where visual impact is important - or where the design system already includes photography or complex branding - printed graphics are the natural choice.
The critical variables are the film and the ink. Printed graphics rely on a suitable film that can take outdoor-rated inks and hold them stable in UV light. Films that aren't suited to prolonged outdoor use will fade faster and can become brittle. We design and print in-house, which means we control the specification from the start rather than relying on a third-party print house's choices.
Printed graphics can be applied as spot panels - for example, a printed rear door graphic alongside cut vinyl on the sides - or as a more extensive partial or full wrap. Each approach suits different budgets and needs.
This is the distinction most fitters don't explain unless you ask. It makes a material difference to the finished result, especially on vans with complex shapes.
Calendered film is manufactured by passing the material through rollers. It's thicker and has more internal stress in the material. It works well on flat panels and large, gently curved surfaces. It's more economical to buy, which is why some fitters default to it across the board. The drawback is that it doesn't conform well to tight recesses, door handles, body creases or compound curves. In those areas it can lift over time, or the fitter has to make relief cuts that interrupt the visual continuity of the graphic.
Cast film is made differently - the material is poured and formed rather than pressed - which makes it thinner, more flexible and far better at conforming to complex vehicle contours without stress in the film. It also tends to have better dimensional stability over time, meaning it's less likely to shrink or lift at edges. For vehicles with any body detail, door handles set into panels or significant curves, cast film is the appropriate choice.
The honest trade-off is cost. Cast film is more expensive than calendered. For a flat-sided box van with minimal panel detail, the premium may not be necessary. For a car, a minibus or a van with sculpted body panels, cutting corners on film type is a false economy.
Not every vehicle needs a full wrap to make an impression. A partial graphic - typically covering the rear doors, the lower sides or specific panels - can be very effective for tradespeople who want visible contact details and a logo without changing the overall colour of the vehicle.
A full or near-full wrap transforms the entire appearance of the vehicle and gives the most visual impact. It also protects the original paintwork under the film, which can be relevant if the vehicle is leased or if resale value is a consideration. Full wraps are more involved to fit and remove, and the film cost is higher, but for businesses where the vehicle is a primary advertising tool, the return on that investment can be significant.
Printed graphics are often finished with an overlaminate - a clear film applied on top of the print. This protects the inks from abrasion and UV exposure. On a vehicle that's going to be in regular use, parked outside and driven in all weathers, a laminate is a sensible addition rather than an optional extra. Without it, printed graphics are more vulnerable to surface scratching and quicker ink fade. We include appropriate lamination as standard on printed work rather than offering it as an add-on.
If you lease your vehicle, graphics will need to come off at the end of the contract. The ease of removal depends on what was fitted and how. Good quality film, properly applied and not left past the point where it becomes brittle, can be removed without damaging the paintwork. We offer wrap removal as part of our service, and we take care with the process.
What causes paint damage during removal is usually a combination of old, degraded film that's baked onto the surface, adhesive that's hardened, and over-aggressive removal techniques. If your vehicle is coming to the end of a lease, give yourself enough notice to have the graphics removed carefully rather than in a rush.
We travel to your premises to carry out the work - there's no need to bring your vehicle to a workshop. We design and print in-house, which keeps the process under one roof and means we can advise you on materials directly rather than passing you to a supplier. It's worth checking that any fitter you choose is insured. We work on all types of vehicles: cars, vans, trailers, minibuses and fleet vehicles.
If you're deciding between options for your Newmarket vehicle or fleet, call us and we'll talk through what suits your design, your vehicle type and your budget - before you commit to anything.
Also available
We design, print and fit full or partial van wraps in Cambridge, working at your premises so your vehicle never leaves your site.
See detailsWe wrap commercial vehicles of all types in Cambridge, designing and printing everything in-house and fitting at your site.
See detailsWe brand entire fleets of commercial vehicles in Cambridge with consistent, professionally printed graphics, designing and fitting everything…
See detailsLet us know what needs branding and we will send a design and price to look over.