For vans, fleet vehicles and cars in Chesterton, we supply and fit vehicle graphics - handling design, print and fitting ourselves, at your location.
There is no single right answer when it comes to vehicle graphics. The best choice depends on your vehicle, your budget, how long you plan to keep the vehicle, and what you want the finished result to do. This page sets out the main options honestly, with the genuine trade-offs of each - so you can make the right call for your business rather than just accepting whatever you are sold.
Cut vinyl is the simplest and most established form of vehicle graphics. A computer-controlled cutter shapes individual letters, numbers and logos from a single-colour vinyl sheet. The cut pieces are then applied directly to the vehicle panel. There is no printing involved - each colour you want is a separate layer of vinyl.
Honest pros: Cut vinyl is durable, holds its colour well over time and is relatively straightforward to remove cleanly when the time comes. It is the most cost-effective option for simple text-based graphics such as a trading name, phone number and trade description. For a sole trader who needs a professional-looking van without spending a large sum, cut vinyl does the job reliably.
Honest cons: You are limited to solid colours - no gradients, no photographs, no complex multi-colour logos. If your brand identity relies on a detailed design or a specific blended colour, cut vinyl cannot reproduce it accurately. Each colour also adds cost, so very complex logos in multiple colours start to close the price gap with printed alternatives.
Printed graphics use wide-format inkjet printing to produce full-colour designs on vinyl film, which is then applied to the vehicle. This covers everything from a simple logo printed in full colour to a large photographic-quality image covering an entire side panel.
Honest pros: No limitation on colour or complexity. If your logo has gradients, photography or fine detail, printed graphics reproduce it accurately. You can have a highly visual, impactful design for a relatively modest cost compared to a full wrap. Partial printed panels - covering just the doors, the lower half of the bodywork, or the rear - are a popular middle ground between simple lettering and a full wrap.
Honest cons: Print quality and longevity vary significantly depending on the ink system and the film used. Printed graphics exposed to constant direct sunlight will fade faster than cut vinyl of equivalent quality. The laminate applied over the print to protect it matters a great deal - without a good overlaminate, UV exposure degrades the colours within a couple of years. Always ask whether a protective laminate is included as standard.
Printed graphics are also slightly more involved to remove cleanly than cut vinyl, particularly if the laminate has aged. This is worth considering if you are applying graphics to a leased or financed vehicle that will need to be returned to standard condition.
A full wrap covers the entire exterior of the vehicle in vinyl film - either a solid colour, a printed design, or a combination of both. The film conforms to every curve, recess and body line of the vehicle.
Honest pros: Maximum visual impact. A fully wrapped van turns every journey into a moving billboard. Full wraps in solid colours also protect the original paintwork from minor stone chips and abrasion. If you are running a vehicle that you want to resell later, the paint underneath a well-fitted wrap can be in better condition than an unwrapped vehicle of the same age. For businesses that want a genuinely premium, consistent look across a fleet, full wraps deliver it.
Honest cons: Cost. A full wrap on a large panel van is a significant investment - typically in the range of £1,500 to £3,000 or more depending on the vehicle size and design complexity. This is not the right choice for every business or every vehicle. It also requires careful consideration for leased vehicles: wraps can be removed, but the condition of the paint underneath depends on the quality of the original paintwork and how the wrap is removed. Have a clear conversation about this before committing.
Full wraps also demand a high standard of fitting. Any contamination, bubbling or poor edge work is obvious across a large surface. This is not a job where cutting corners on preparation saves money - it just moves the cost to a remedial refitting later.
A partial wrap covers a defined section of the vehicle - typically the bonnet, roof, lower bodywork panels or the rear doors. It combines the visual impact of a printed design with a lower cost than a full wrap. The seam between the wrap and the original paintwork needs to be positioned carefully - ideally along a natural body line or panel edge - so it does not look like a cut-short job.
Honest pros: Good value for impact. A striking partial wrap can look more impressive than mediocre full-vehicle lettering. It is also the right choice when the original bodywork is in mixed condition - you wrap the panels that are visible and presentable, and the design accommodates the rest.
Honest cons: Design matters more here than on a full wrap, because the transition between the wrap and the base vehicle colour has to be intentional and clean. A partial wrap that looks like a full wrap that ran out of material is not a good result. The design needs to be conceived as a partial from the outset.
Magnetic signs are not a wrap or a graphic in the fixed sense - they are removable panels that attach to a vehicle magnetically. They are sometimes used by people who want to brand a personal vehicle for work use without making a permanent change to it.
Honest pros: Fully removable in seconds. Useful if the same vehicle serves both business and personal use and you do not want signwriting visible outside work hours.
Honest cons: Quality of appearance is noticeably lower than applied graphics. The edges are visible. They can lift at speed, particularly on motorways or in poor weather, which creates a road hazard and can damage the vehicle's paintwork. They also attract theft. For a genuine commercial vehicle used primarily for work, magnetic signs are rarely the right long-term answer. For a private car occasionally used for business, they may be a reasonable short-term option.
For fleet managers in Chesterton running more than one vehicle, consistency is the core challenge. When different vehicles in a fleet have been done at different times, by different suppliers, with slightly different colours or layouts, the result undermines the professional impression you are trying to create. A uniform fleet looks deliberate; a mixed fleet looks unmanaged.
The practical way to achieve consistency is to hold a master design file and a colour specification that any future fitting must match exactly. We handle design in-house, which means we can maintain your master file and reproduce it accurately each time a new vehicle is added to the fleet or an existing graphic is replaced.
Fleet pricing is typically structured to reflect volume. If you are bringing multiple vehicles at the same time or booking a rolling programme, the per-vehicle cost is lower than individual one-off jobs. It is worth talking to us about your fleet size and renewal cycle so we can work out the most practical arrangement.
We design, print and fit entirely in-house. When you come to us with a brief - even if it is just a rough idea and a phone number - we produce the design, print it on our own equipment and fit it ourselves. Nothing is outsourced to a third-party printer, so there is no version control problem between what you approved and what arrives on your vehicle.
We come to you. Fitting is done at your premises or yard in and around Chesterton - you do not need to drop vehicles at a workshop. For businesses with a fixed depot or yard, we work on-site through a fleet fitting schedule that fits around your operation.
We also remove existing graphics. Whether you are rebranding, returning a lease vehicle or updating an older design, we can lift existing film cleanly as part of the job. The condition of the paint underneath and the age of the existing graphics both affect the outcome, so we will tell you honestly what to expect before we start rather than after.
These are indicative figures for a standard panel van to give you a starting point for budgeting. Every job is priced individually based on what is actually needed.
Fleet pricing is discussed on a job-by-job basis. Call us, tell us what vehicles you have and what you are trying to achieve, and we will give you a straight number.
Before booking vehicle graphics with any supplier, it is worth confirming a few things:
For vehicle graphics in Chesterton, call us directly and we will answer all of these plainly before you commit to anything.
Also available
We design, print and fit full or partial van wraps in Cambridge, working at your premises so your vehicle never leaves your site.
See detailsWe wrap commercial vehicles of all types in Cambridge, designing and printing everything in-house and fitting at your site.
See detailsWe brand entire fleets of commercial vehicles in Cambridge with consistent, professionally printed graphics, designing and fitting everything…
See detailsLet us know what needs branding and we will send a design and price to look over.