Covering Cambridge and the surrounding area Monday to Friday 9:00am - 5:00pm Get a quote

Van Wrapping in Chesterton

A van wrap fitted at your Chesterton location turns any commercial vehicle into a working advertisement, and choosing the right materials from the start makes the difference between a wrap that lasts and one that does not.

5.0 from 9 Google reviews Est. 2020 A written quote up front Mock-up on your vehicle type first We bring the fitting to you

What van wrapping involves

Van wrapping covers the exterior panels of your vehicle in a printed or coloured vinyl film. The film is applied directly over the original paintwork, protecting it and carrying your brand, contact details or colour scheme. When you sell the van or rebrand, the film is removed and the paint underneath is revealed in its original condition.

We design and print in-house, then travel to you. Fitting is done at your premises in Chesterton, so there is no drop-off and collection from a remote workshop. The whole process from brief to finished van is managed by us.

The materials used in van wrapping, explained honestly

The choice of vinyl film matters more than most customers realise, and suppliers do not always make it easy to understand the difference. Here is a plain account of what is available and what is worth paying for.

Cast vinyl film is the standard for a full van wrap. It is manufactured by pouring the vinyl compound onto a casting sheet, which produces a thin, stable film with no built-in memory. Because it has no tendency to shrink back to a flat state, it conforms well around door handles, wheel arches, wing mirrors and body creases without lifting at the edges over time. Cast film is more expensive than the alternative, but for a full vehicle wrap it is the right material for the job.

Calendered vinyl film is made by squeezing the compound through rollers. It is thicker and stiffer, and it retains a memory of its original flat shape. On flat or gently curved surfaces it performs reasonably well. On complex curves and deep recesses it is more likely to lift at edges as it tries to return to flat, particularly in warm weather. For simple flat panel graphics, it can be appropriate. For anything that wraps around body contours, cast film is a better choice.

Overlaminate (clear protective film) is applied over the printed graphic layer on most quality wraps. It protects the print from UV exposure and surface abrasion, keeps colours stable for longer, and makes cleaning easier. Printed wraps without a laminate fade faster and are more vulnerable to scratches. It is worth confirming that overlaminate is included, not an optional extra.

Finish options and their trade-offs

The finish of the outer face of the film affects both the look and the practical performance of the wrap.

  • Gloss. High visual impact, makes colours appear deep and saturated. Shows fingerprints and water spots more readily, but wipes down easily. The most popular choice for branded commercial vehicles.
  • Matte. A flat, non-reflective finish that photographs well and looks distinctive. Fingerprints and light scuffs are more visible and require a different cleaning approach. Some pressure washing can damage matte finishes if done at close range.
  • Satin. Sits between gloss and matte. Less reflective than gloss, cleaner-looking than matte. A practical middle ground for working vans that need to stay presentable with minimal fuss.
  • Colour change film. Used when you want to change the base colour of the vehicle rather than apply a full printed graphic. Available in gloss, matte and textured finishes. Useful for fleet consistency or rebranding without a full repaint.

Full wrap, partial wrap or spot graphics: what suits different needs

Not every job is a full vehicle wrap, and spending more than the work warrants is not good advice. Here is an honest assessment of each option.

Full wraps cover every painted panel on the vehicle. They give the most consistent, professional result and offer the best paint protection. They cost more in materials and fitting time. For a business that depends on a strong visual presence, they are worth it. For a sole trader who mainly wants a phone number and a logo on the side, they may be more than is needed.

Partial wraps cover specific sections, most commonly the rear doors, both side panels or just the rear. They cost less and can still be highly effective if the design uses the full panels well. The key question is whether the unbranded sections of the van will look unfinished alongside the wrapped areas.

Cut vinyl lettering and graphics are the lowest-cost option. The lettering is cut from a single-colour film and applied directly to the bodywork. No print is involved. This works well for straightforward contact details and simple logos. It does not reproduce photographs, gradients or complex multi-colour artwork.

Spot graphics combine a printed element, such as a logo or branded panel, with cut vinyl for the text. This gives a more polished result than cut vinyl alone without the cost of a full wrap.

What affects the cost

Van wrapping costs vary depending on several factors, and it is worth understanding what you are comparing when you receive quotes.

  • Vehicle size: a large Luton or long wheelbase Transit has significantly more surface area than a small panel van, which affects both material and labour costs.
  • Film grade: cast film costs more than calendered. If a quote is unusually low, it is worth asking which is being used.
  • Complexity of the design: a solid colour change is simpler to fit than a photographic design with bleeds and multiple panel breaks.
  • Number of recesses and body features: deep door handles, side-loading rails and stepped panel lines all add fitting time.
  • Whether existing graphics or a previous wrap need to be removed first.

As a broad reference, a full wrap on a medium wheelbase panel van typically runs from around £1,500 to £2,500. Partial wraps and spot graphics sit below that range. These figures depend on design complexity and vehicle condition, so they are a starting point rather than a fixed price.

Wrap removal as a standalone service

We carry out wrap removal separately from new installations. If you are updating your branding, changing vehicles or selling a van with an old livery, we can remove the existing wrap without damaging the paintwork below. The condition of the original paint does affect how cleanly a removal goes, particularly if the wrap has been in place for a long time or was not applied correctly to begin with.

The process from enquiry to fitted wrap

The process starts with a conversation about what you need: your brand, your colours, what the van is used for and what you want people to do when they see it. We produce the design in-house, share it with you for approval, then print and prepare the film. When everything is ready, we come to your location in Chesterton to fit. You do not need to bring the van anywhere.

Call us to discuss your vehicle and what you are trying to achieve. We will give you a straight answer about which option makes sense for your budget and your business.

Working with us in Chesterton

  • Design and print both done by us, not sent out.
  • Old lettering or wraps removed first, if needed.
  • Fleet work in Chesterton split into stages.
  • Artwork stored, ready for your next vehicle.

Van Wrapping in Chesterton?

Let us know what needs branding and we will send a design and price to look over.

Call Quote