A full van wrap is one of the most visible investments a tradesperson or small fleet operator in Chesterton can make, and choosing the right material and finish makes a significant difference to how long it lasts and what it costs over time.
A full wrap covers every visible exterior panel of your van in a single, continuous printed film. Sides, bonnet, roof, rear doors, bumpers and mirrors all become part of one consistent design. The original paintwork is protected underneath, and the wrap can be removed later without damaging the panels.
We design and print everything in-house at Van Wrapping Cambridge, then travel to you. The installation takes place at your premises in Chesterton, keeping disruption to your working day to a minimum.
All vehicle wrap films are either cast or calendered, and understanding the difference helps you make a better decision before you spend money.
Calendered vinyl is produced by pushing molten PVC through rollers. It is a thicker, stiffer film and costs less to produce. It works well on flat or gently curved surfaces but has limits when it comes to tight compound curves, deep recesses and door handles. Over time, calendered film can shrink slightly and begin to lift at edges and corners. For simple fleet graphics on flat panel areas, it can be a cost-effective choice. For a full wrap that needs to conform across a whole van body, it carries more risk of premature lifting, particularly at complex areas.
Cast vinyl is made by pouring a liquid mixture onto a flat surface and letting it cure. The result is a thinner, more flexible film that conforms to compound curves far more naturally. It is more dimensionally stable, meaning it is less likely to shrink or lift over time. Cast film is the industry standard for full vehicle wraps and is the right material for most van wrap applications.
The finish you choose changes the character of the van considerably, and each option has practical implications beyond appearance.
A full wrap is not always the right answer for every situation, and an honest conversation about alternatives saves time and money on both sides.
Full wrap vs. partial livery: A partial livery with side graphics, rear lettering and a door logo costs less and can be highly effective. The limitation is that partial graphics leave visible areas of plain or ageing paintwork, which caps the visual impact. A full wrap treats the van as a single canvas and allows designs that cannot be achieved with cut vinyl alone. For a newer van with good paintwork that is going to be on the road for several more years, a full wrap typically delivers better return on the investment.
Full wrap vs. repaint: A repaint is permanent. It changes the vehicle's colour on the V5, affects lease return conditions and cannot be reversed. A wrap protects the original paint and comes off cleanly when removed carefully. If you lease your vans or plan to sell them, a wrap is almost always the more practical option. The cost of a full wrap is broadly comparable to a quality respray, though a good respray on a large van can run to significantly more.
Full wrap vs. magnetic signs: Magnetic signs are low cost and removable but cover only small areas, do not conform to curves, can trap moisture and scratch paintwork if not removed and cleaned regularly. They are a reasonable short-term solution for single traders but are not a substitute for a proper livery on a vehicle that represents your business every day.
Van size is the most obvious factor. A compact panel van has less surface area than a high-roof long-wheelbase Sprinter or Transit, so the film and labour costs differ substantially. As a broad guide, full van wraps in the UK currently range from around £1,500 for a small van to £3,500 or more for a large high-roof vehicle. Design complexity, the finish specified and the condition of the existing paintwork all affect the final figure.
Film quality also affects price. Cast film costs more than calendered film to produce, and that difference comes through in the quote. If you receive a significantly lower quote than others, it is worth asking what film specification is being used. The difference in long-term performance between a quality cast film and a budget calendered product on a full wrap is real and measurable.
Panel condition matters. If the van has dents, deep scratches or uneven paintwork, the film will conform to those imperfections and may not bond cleanly in those areas. Some preparation work may be needed beforehand, or you should be advised of the limitations before the installation begins.
We design and print in-house, which means the colour output is controlled at every stage. If you need a second van wrapped six months after the first, the colour will match because the print setup is ours. Work sent to external print houses introduces variables that can produce colour drift between jobs.
In-house design also means we can iterate on artwork quickly. If you have a logo and brand colours, we work from those. If you are starting from scratch, we build a design that works at vehicle scale, which is different from designing for print or screen. Fonts, colours and layouts that look good on a business card can look weak or unreadable at 60 mph. We set up all artwork to work in real-world viewing conditions.
We also offer wrap removal. If you are replacing an old livery or returning a leased vehicle, knowing that the same business that fitted the wrap can remove it cleanly is worth factoring in. Film that has been on a van for a long time, particularly if it was not a cast product or was fitted over poor paintwork, can be more difficult to remove without residue. We will tell you what to expect before we start the removal, not after.
All work is carried out at your premises in Chesterton. There is no need to leave your van somewhere unfamiliar or arrange alternative transport.
Send photos of your vehicle, your colour and design preferences and your location in Chesterton. We will come back to you with a straight price based on your specific van and requirements. Call us to talk it through.
Also available
We design, print and fit full or partial van wraps in Cambridge, working at your premises so your vehicle never leaves your site.
See detailsWe wrap commercial vehicles of all types in Cambridge, designing and printing everything in-house and fitting at your site.
See detailsWe brand entire fleets of commercial vehicles in Cambridge with consistent, professionally printed graphics, designing and fitting everything…
See detailsLet us know what needs branding and we will send a design and price to look over.