Getting your van signwritten in Trumpington is an investment in your business's appearance - and straightforward aftercare means it stays looking good for as long as possible without any fuss.
Van signwriting is applied to your vehicle's panels using adhesive vinyl - either cut vinyl lettering in a single colour, or digitally printed graphics laminated with a protective overlaminate film. Both are designed to withstand normal road conditions, but neither is indestructible. How long your signwriting lasts and how good it continues to look depends partly on the quality of the original application and partly on how the van is treated afterwards.
Cut vinyl is a coloured film with a pressure-sensitive adhesive. The colour is in the material itself, not printed on. Printed graphics use an ink layer sandwiched between a white vinyl base and a clear protective laminate. The laminate is what takes the daily punishment of road grime, UV and car wash brushes.
Fresh vinyl needs time for the adhesive to cure fully. For the first 48 hours after application, avoid washing the van, avoid driving in heavy rain if you can, and don't park where the panels will be in direct strong sunlight for extended periods. The adhesive is still reaching its full bond strength, and disturbing it during this period can lead to edge lifting that wouldn't have happened if the van had been left alone.
Don't be tempted to press down any area that looks slightly raised during this period - the adhesive is still working and what looks like a small bubble may well settle on its own. If something still looks wrong after 72 hours, that's the time to call us.
How you wash a signwritten van matters more than most people expect. Automatic car washes with rotating brush systems are a common cause of edge lifting. The brushes catch the edges of letters and graphics - especially at corners - and begin to peel them back. It may only be slight to begin with, but once an edge is lifted, water and grime get underneath and the adhesion fails progressively from that point.
Touchless (jet wash) automatic car washes are less damaging, but high-pressure jets directed at a low angle along panel edges can still cause problems over time. If you use a jet wash yourself, don't direct the jet at the edges of the vinyl at a shallow angle. Keep the nozzle pointing squarely at the panel surface from a sensible distance.
Hand washing with a soft cloth or sponge and a mild detergent is the safest option. Work with straight strokes rather than circular, and pay attention to the edges of letters rather than dragging across them. Rinse thoroughly. Avoid abrasive cleaning pads or cream cleaners - these will scratch the laminate on printed graphics and dull the surface of cut vinyl over time.
Standard car wax applied over vinyl signwriting is not harmful to the vinyl itself, but wax that gets into the edges of letters and builds up can begin to lift them. Apply wax only to the bodywork panels, and avoid running wax-covered cloths directly over the edges of graphics. Many vehicle detailers know to mask off or avoid signwritten areas - if you use a detailer, let them know the van has vinyl graphics.
Solvent-based cleaning products, petrol, brake fluid and similar chemicals can damage vinyl and its adhesive. If any of these get onto a signwritten panel, rinse immediately with clean water.
UV exposure fades vinyl over time. Parking under cover, in a garage or under a carport when the van isn't in use will extend the life of your signwriting noticeably compared with leaving the van in direct sun for years. This isn't always practical for tradespeople, but if you have the choice, shaded parking makes a difference.
Avoid parking the van so that the signwritten panels are regularly pressed against rough surfaces - walls, posts, overgrown hedges. These cause surface abrasion that damages the laminate on printed graphics and scratches cut vinyl.
A quick visual check every few weeks takes less than a minute and catches problems while they're small. Run your eye along the edges of all lettering and graphics. Look for:
Catching a lifting edge early means it can often be re-adhered without replacing the whole section. Left alone, a lifted edge will grow as wind catches it at speed, water gets underneath and the adhesive is progressively contaminated. A small problem ignored becomes a full replacement job.
If you spot a lifted edge, don't try to press it back down with your fingers and hope for the wind. The adhesive underneath will have picked up contamination - dust, moisture, skin oils - and it won't re-bond reliably without being cleaned and sometimes re-activated with gentle heat. Pressing it flat looks like a fix but typically fails again within days.
Bubbles are similar. If a bubble is small, leave it - it may settle. If it's large or growing, the right fix is to have the section professionally re-laid or replaced, not to try pricking it with a pin, which lets moisture in and makes the problem worse.
Surface scratches that go through the vinyl to the panel beneath need the panel to be repaired before new vinyl goes on. Applying new vinyl over a damaged surface means the problem is hidden, not solved, and the new graphics won't lie flat.
Vinyl has a finite life. Printed graphics with a protective laminate typically look good for several years under normal conditions. Cut vinyl in standard colours holds its colour for a similar period. When the material starts to crack, fade significantly or lift in multiple places at once, the right decision is usually a full strip and redo rather than further maintenance. We carry out removal as well as new application, and we travel to customers in Trumpington to do it.
We design and print in-house and come to you - the work is done at your premises or wherever suits you locally. If your existing signwriting has seen better days, or you're ready to get a van signwritten for the first time, call us and we'll give you a straight price based on what you need.
Also available
We design, print and fit full or partial van wraps in Cambridge, working at your premises so your vehicle never leaves your site.
See detailsWe wrap commercial vehicles of all types in Cambridge, designing and printing everything in-house and fitting at your site.
See detailsWe brand entire fleets of commercial vehicles in Cambridge with consistent, professionally printed graphics, designing and fitting everything…
See detailsLet us know what needs branding and we will send a design and price to look over.