Covering Cambridge and the surrounding area Monday to Friday 9:00am - 5:00pm Get a quote

Van Graphics in Trumpington - Aftercare and Keeping Them Looking Good

Getting van graphics fitted in Trumpington is only the start - how you look after them afterwards determines how long they stay sharp and whether they carry on working for your business.

5.0 from 9 Google reviews Est. 2020 A written quote up front Mock-up on your vehicle type first We bring the fitting to you

What Van Graphics Involve

Van graphics combine printed colour panels, images and text applied to the exterior of your vehicle to create a finish that plain lettering can't match. For tradespeople and small business owners in Trumpington, the right graphics turn your van into a 24-hour advert - visible on every job, every delivery and every time you're parked up.

The materials are specialist vinyl films printed with UV-resistant inks. We design and print in-house, then come to your premises to fit the panels.

Why Aftercare Matters More Than People Expect

Van graphics are exposed to everything the road throws at them - road salt, bird droppings, diesel spray, UV light, frost and pressure washing. The vinyl and inks are designed to handle this, but only if the graphics are looked after properly. Neglect shortens their life and means you're paying for a replacement sooner than you should have to.

The good news is that most aftercare is simple and doesn't take long. Getting into a few habits when the graphics are new will pay off over the years.

The First Few Days After Fitting

Fresh graphics need a short settling period before they're exposed to heavy washing or pressure. The adhesive is still curing, particularly around edges and in areas where the film has been heat-formed to curves. For the first few days, avoid jet washing and machine car washes entirely.

Hand-washing with clean water and a soft cloth or sponge is fine from day one if the van is genuinely dirty and needs attention. Avoid running anything abrasive across the surface - even a stiff brush used firmly will mark the film.

Routine Washing: What to Do and What to Avoid

Once the graphics have had time to settle, regular hand-washing is the best way to keep them looking good. Use a mild detergent and warm water, rinse thoroughly and dry with a clean cloth. This removes the road salt and grime that, if left on the surface, gradually dull the colours and attack the film's edges.

Automated car washes with rotating brushes are worth avoiding. The brushes catch on edges, particularly around door handles, mirrors and body seams, and can lift the film over time. Touchless automatic washes are less aggressive, but the high-pressure jets used in some of them are still harsh on edges. If you use one, check the graphics afterwards for any signs of lifted edges.

Pressure washing is fine in general, but keep the lance at a reasonable distance - a metre or more from the surface - and don't angle it directly at edges or corners. A flat, perpendicular spray across the surface is much safer than a close-range jet aimed at a panel edge.

Dealing with Bird Droppings, Tree Sap and Fuel Spillages

These are the three main causes of premature damage to van graphics, and the common factor is time. The longer any of them sit on the surface, the harder they are to remove and the more damage they cause.

  • Bird droppings are acidic and will etch into the surface if left in warm weather. Remove them as soon as you notice them - soften with a damp cloth, then lift gently. Never try to wipe dry droppings off with a dry cloth; you'll drag grit across the film.
  • Tree sap hardens and bonds to the surface. A small amount of isopropyl alcohol on a soft cloth will usually lift it cleanly without affecting the film underneath. Test a small hidden area first if you haven't used this before.
  • Fuel spillages at the filler cap can run down the bodywork and sit on the film. Rinse off immediately with water. Prolonged contact with fuel breaks down vinyl adhesive and can cause permanent marks.

Polishes, Waxes and Sealants

Standard car polishes contain abrasives and solvents that will dull printed van graphics over time. They're designed for clear-coat paint, not for vinyl film. Keep them away from any area covered by graphics.

Some tradespeople apply a surface sealant or spray wax to their van as a general protective measure. Products designed specifically for vinyl-wrapped surfaces are fine. Generic waxes and sealants are not - they can leave a hazy residue and in some formulations affect the edge adhesion. If in doubt, leave it off the graphics and apply it only to plain painted areas.

Checking for Lifting Edges

Once every few months, run your fingers around the edges of the graphics - particularly around door handles, mirror housings, the bottom edges of side panels and anywhere the film has wrapped around a curve. These are the areas most likely to lift first.

A small lifted section caught early can sometimes be re-adhered cleanly. Left alone, moisture gets under the film, the adhesive breaks down and what was a minor lift becomes a panel that needs replacing. This is a five-minute check that can save a significant repair cost.

If you find a section that's starting to lift, don't try to push it back down with your thumb and hope for the best. The surface underneath needs to be clean and dry before the adhesive will re-bond. Call us and we'll advise whether it can be re-adhered or whether the panel needs attention.

Winter Care

Frost is not a problem for vinyl graphics in itself, but ice scrapers are. Keep the scraper on the glass only. Pulling an ice scraper across a graphics panel will scratch and tear the film. If your van is parked outside overnight and iced up, pour lukewarm water over the graphics panel rather than scraping, or simply wait for them to defrost naturally.

Road salt builds up quickly in winter and is worth washing off regularly - more often than in summer. Salt and grit sitting at the bottom edge of a side panel will work into any slight gap in the film over weeks and months. A weekly rinse in winter is not excessive for a van in daily use.

When to Think About Removal or Replacement

Even well-maintained van graphics have a natural lifespan. When you start to see uneven fading, edge cracking or colours that have lost their vibrancy despite good care, it's a sign the film has reached the end of its useful life. Replacement at this stage makes more sense than continued repairs.

We offer van graphic and wrap removal as a service. When removal is done correctly, the paintwork underneath should come back clean. We come to you in Trumpington for removal and re-application, so there's no need to bring the vehicle to us.

Get the Most from Your Van Graphics

If you've just had graphics fitted, or you're thinking about getting them done, call us to talk through any aftercare questions specific to your vehicle or how you use it. A few minutes on the phone can clear up what you should and shouldn't be doing, and it's much cheaper than an avoidable repair.

Working with us in Trumpington

  • Design and print both done by us, not sent out.
  • Old lettering or wraps removed first, if needed.
  • Fleet work in Trumpington split into stages.
  • Artwork stored, ready for your next vehicle.

Van Graphics in Trumpington?

Let us know what needs branding and we will send a design and price to look over.

Call Quote