Covering Cambridge and the surrounding area Monday to Friday 9:00am - 5:00pm Get a quote

Van Graphics in Newmarket: Materials and Options Explained

Choosing the right van graphics for your Newmarket business starts with understanding what the materials actually are and what each option honestly delivers.

5.0 from 9 Google reviews Est. 2020 A written quote up front Mock-up on your vehicle type first We bring the fitting to you

What van graphics are made from

Van graphics are produced using self-adhesive vinyl film, printed with solvent or latex inks and then laminated to protect the surface. That is the basic formula, but the differences in film type, ink technology and laminate choice have a real effect on how the finished job looks, how long it holds up and how easy it is to remove later. Understanding these differences helps you make the right call rather than simply going with whatever a supplier recommends.

There are two main categories of vinyl film: calendered and cast. Calendered film is produced by rolling the PVC material flat under pressure. It is thicker, less flexible and tends to shrink back slightly over time, particularly on curved surfaces or in the warmth of summer. Cast film is produced by pouring liquid PVC onto a moving belt and allowing it to cure. It is thinner, more conformable around complex shapes and more dimensionally stable over time. For a commercial van in daily working use, cast film is generally the better choice for full or large-area graphics - it handles door handles, recesses and bodywork curves without lifting at the edges.

Calendered film is not worthless, though. For flat or near-flat panel areas, simple cut vinyl lettering and short-term applications, it performs adequately and costs less. The honest answer is that the right film depends on the complexity of the job and how long you need it to last.

Printed graphics versus cut vinyl lettering

Cut vinyl lettering is exactly what it sounds like: individual letters and shapes cut from coloured vinyl sheet and applied to the panel. There is no printing involved. The colour choices are limited to whatever solid colours that film comes in, but the finish is clean, durable and resistant to UV fading because the colour runs all the way through the film rather than being printed on top.

Printed graphics open up the full range of colours, gradients, photographs and complex imagery. The design is printed onto white or clear vinyl film, then laminated to protect the ink layer from UV, abrasion and pressure washing. Printed graphics can achieve photographic quality and they give you far more creative freedom than cut vinyl alone.

Many van graphics jobs combine both: a large printed panel for imagery and colour, with cut vinyl lettering for phone numbers, website addresses and trade text, because cut vinyl text holds its edges cleanly over time and pressure washes better than a printed edge.

Laminates: gloss, satin or matte

Once the graphics are printed, a clear laminate film is applied over the top. This protects the ink from UV degradation, scratches and chemical cleaning. The laminate also determines the final surface finish of the graphic.

  • Gloss laminate gives the most vivid, saturated colour and the sharpest contrast. It looks striking but it does show fingerprints, fine scratches and watermarks more readily than other finishes.
  • Satin laminate sits between gloss and matte. It has good colour depth without the full mirror-like reflection of gloss, and it is easier to keep looking clean on a working van.
  • Matte laminate gives a flat, non-reflective finish that photographs well and can look very smart on certain colour combinations. Dark colours in matte laminate have a premium appearance, though the finish can scuff more visibly than gloss if the van takes daily rough treatment.

For Newmarket tradespeople running a van in and out of yards and job sites, satin is often a practical middle ground. It holds its appearance well under working conditions without the upkeep that a full gloss finish can require.

Partial graphics, full sides or full wrap: the honest comparison

A full vehicle wrap covers every painted panel - roof, bonnet, bumpers, door pillars and all. It delivers the most complete transformation and protects the paint underneath, which can be an advantage if you plan to sell or hand back the vehicle. It is also the most expensive and time-consuming option, and it is only worth doing if the bodywork preparation is thorough and the van's panels are in reasonable condition.

Partial side graphics cover the main visible surfaces - typically the sliding and rear doors, and the cab doors - leaving the cab front, roof and bumpers in the original paint colour. Done well, this can still be a strong, eye-catching result. It costs less than a full wrap and suits vans where the bodywork is mixed in condition.

Spot graphics - a logo on the door, a rear panel design, or a bonnet graphic alongside simple lettering on the sides - are the most targeted option. They work well for businesses that want a recognisable, professional look without committing to a large-area graphic. They are also quickest to update when contact details or branding changes.

There is no single right answer. The best option depends on your van's panel condition, your budget, how long you plan to keep the vehicle and what level of visibility you need on the road.

Colour: original paint versus printed colour

One decision that catches people out is whether to match a printed colour to the van's existing paint. If you are adding graphics to panels that remain in the original paint colour, the printed sections need to sit alongside that original colour. Colour-matching between a printed vinyl and a painted panel is very difficult to achieve exactly, and the difference between the two will be visible in certain light conditions. The cleanest solution is usually to design the graphics so that any printed colour fully covers the panel rather than trying to blend into or match the original paint.

Alternatively, the original paint can serve as the background if the design is planned around it from the start. A white van is the most flexible background for printed graphics because white is the base colour of printed vinyl film anyway.

Designed and printed in-house, fitted at your premises in Newmarket

Some suppliers design and print their graphics in-house. Where they do, you deal with one team from artwork to fitting, and design changes need not be passed between separate suppliers. We come to you in Newmarket - the work is done at your location, whether that is a yard, a depot or wherever you keep the van. When work is done on-site, it is worth checking that the installer is insured before it starts.

Removing old wraps and graphics is a separate task, and it is worth asking about before new ones go on. If you need old graphics stripped before new ones go on, or if you are preparing a lease vehicle for return, we can handle that as part of the job.

To discuss which option suits your van and your business, call us and describe what you are looking for. We can talk through the design, the film choice and the finish before anything is committed to print.

Working with us in Newmarket

  • Design and print both done by us, not sent out.
  • Old lettering or wraps removed first, if needed.
  • Fleet work in Newmarket split into stages.
  • Artwork stored, ready for your next vehicle.

Van Graphics in Newmarket?

Let us know what needs branding and we will send a design and price to look over.

Call Quote