Van graphics give Chesterton businesses a vehicle that works as a marketing tool every mile it travels - but choosing the right materials and format for your situation makes a real difference to what you get for your money.
Van graphics are printed panels, colour blocks and text applied to a vehicle's exterior. They sit between a simple set of cut lettering and a full vehicle wrap in terms of coverage and cost. Graphics typically cover the main visible panels - sides and rear doors - with the design printed onto adhesive vinyl film and then installed panel by panel.
We handle design, printing and installation in-house. We come to you, so the work is carried out at your premises or yard. You don't have to leave the van anywhere, and you're not without it for a day while it sits in someone else's workshop.
The vinyl film used for van graphics is not all the same, and the difference matters more than most suppliers make clear. There are two broad categories: calendered films and cast films. Understanding the difference helps you make an informed decision rather than just comparing prices.
Calendered film is produced by rolling the vinyl material to the required thickness. It is a cost-effective option and works well on flat, simple surfaces. The limitation is that calendered vinyl has more internal stress than cast film, which means it tends to shrink slightly over time - particularly in warm conditions. On a flat panel this shrinkage is minimal. On a panel with significant curves, recesses or door handles, it can cause lifting at edges over time.
Calendered film is a reasonable choice for a van with predominantly flat panel surfaces, a shorter planned lifespan for the graphics, or a tighter budget. It's not a poor-quality material in the right application; the problem arises when it's used on complex surfaces where it isn't suited.
Cast film is produced by pouring the vinyl compound onto a casting sheet and allowing it to cure. This process removes the internal stresses present in calendered film, making cast vinyl more conformable - it moves with the surface rather than fighting it. It sits better around curves, panel recesses, rivets and door furniture. For a van that will carry the graphics for several years, cast vinyl is the better-performing option.
The trade-off is cost. Cast vinyl is more expensive per square metre than calendered. For most trade vehicles where the graphics are expected to last several years and the van has any panel complexity, the cost difference is generally worth it.
The print matters as much as the substrate. Inks used for vehicle graphics need UV resistance to hold colour outdoors. Lower-grade inks fade noticeably within a year or two. A good print on a quality film should hold consistent, accurate colours across the useful life of the graphic. Colour-matching to brand guidelines - Pantone or RAL references - is achievable with proper wide-format printing equipment, which is why we print in-house rather than outsourcing.
Most quality van graphics include an overlaminate - a clear protective film applied over the print. This protects the inks from UV, abrasion and pressure washing. Without a laminate, the printed surface is exposed directly to the elements. A gloss laminate enhances colour vibrancy; a matt laminate gives a flatter, more premium appearance. Both protect the print. Asking whether a laminate is included is a sensible question when comparing quotes.
Van graphics, partial wraps and full wraps are often discussed as though they're separate products, but they're more of a spectrum. Here's a plain-language breakdown to help you decide what level of coverage actually fits your situation.
For most sole traders and small fleet operators, a well-designed set of panel graphics or a partial wrap hits the best balance of visibility, cost and practicality. A full wrap is worth the extra outlay when vehicle appearance is central to the brand - for example, a business where customers see the van up close at every job.
Regardless of which option you choose, there are a few practical things worth confirming before you sign off on any van graphics job.
Van graphics don't last forever, and at some point they need to come off - either because the van is being sold, the graphics are being updated or the material has degraded. We offer graphic removal as a separate service. Removal done properly - using the right heat and tools - should leave the paint in good condition. Rushed removal, or removal attempted with the wrong technique, can lift paint or leave adhesive residue that's time-consuming to clear.
If you're buying a used van that already has someone else's graphics on it, it's worth having those removed and the surface properly cleaned before new graphics go on. Applying new vinyl over old residue is a common shortcut that causes adhesion problems later.
When comparing suppliers, ask whether they design and print in-house, whether they will come to your location and whether they are insured. If you're weighing up options and want a straight conversation about materials, coverage and cost for your specific van and business, call us and we'll walk you through it without the sales pitch.
Also available
We design, print and fit full or partial van wraps in Cambridge, working at your premises so your vehicle never leaves your site.
See detailsWe wrap commercial vehicles of all types in Cambridge, designing and printing everything in-house and fitting at your site.
See detailsWe brand entire fleets of commercial vehicles in Cambridge with consistent, professionally printed graphics, designing and fitting everything…
See detailsLet us know what needs branding and we will send a design and price to look over.