Covering Cambridge and the surrounding area Monday to Friday 9:00am - 5:00pm Get a quote

Lorry and HGV Graphics in Trumpington

Van Wrapping Cambridge fits lorry and HGV graphics for businesses in Trumpington, designing and printing in-house before coming to your site to apply graphics to curtainsiders, box vans, flatbeds and rigid trucks.

5.0 from 9 Google reviews Est. 2020 A written quote up front Mock-up on your vehicle type first We bring the fitting to you

What HGV Graphics Involve

Full lorry and HGV graphics range from cut-vinyl cab lettering through to large-format printed wraps covering every visible panel of a curtainsider or box van. The work is designed and printed at our Cambridge base, then fitted at your premises or yard. The job is done on your site so your vehicles stay where you need them.

Once the graphics are fitted, the vehicle is immediately back in service. But what happens in the months and years after that fitting determines how long the graphics stay looking good and how much you spend at the next rebrand cycle.

Aftercare and Maintenance: Keeping HGV Graphics in Good Condition

HGV graphics are exposed to more punishment than graphics on a car or van. Long motorway runs, loading docks, pressure washing, curtain flexing, diesel exhaust and road grit all work on the film and adhesive over time. Good aftercare significantly extends the useful life of a set of graphics and keeps your fleet looking professional throughout.

The First 72 Hours After Fitting

Freshly applied graphics need time for the adhesive to cure fully. For the first 72 hours after fitting, avoid high-pressure washing, prolonged rain exposure where possible and anything that flexes the panels repeatedly. The adhesive is bonding to the substrate during this period, and disturbing that process at the edges is the most common cause of early lifting. After 72 hours, normal use can resume.

How to Wash a Liveried HGV

Washing is the single biggest factor in how long graphics last on a working lorry. The key points are:

  • Avoid automated brush rollover washes entirely. The rotating brushes catch and lift edges, particularly around panel joins, rivets and curtain tracks. Even a single pass through a brush wash can lift corners that then allow moisture underneath.
  • Touchless automatic washes are safer than brush washes but not entirely without risk - high-pressure jets directed at a low angle against the edge of a graphic will lift it over time.
  • Hand washing with a soft cloth or sponge and a mild detergent is the best option. Rinse from the top down and keep the jet of any pressure washer at least 30 centimetres from the surface, directed straight on rather than at a raking angle.
  • Avoid solvents, petrol, white spirit or citrus-based degreasers on or near graphics. These attack the adhesive and the laminate surface.
  • Diesel spillage around the fuel cap area should be rinsed off as soon as possible. Left to sit, diesel degrades the film and laminate.

Checking Edges Regularly

A five-minute visual check of the graphics every couple of months catches problems before they become expensive. What to look for:

  • Lifting edges at panel joins, wheel arch trims, corner mouldings and anywhere the film terminates
  • Bubbling that was not present after fitting - this usually indicates moisture has got under the film at a lifted edge
  • Cracking along deep crease lines on curtainsider curtains, particularly on vehicles where the curtains are opened and closed frequently
  • Peeling around rivets on aluminium curtainsider frameworks

A small lifted edge caught early can often be re-pressed with a heat gun and squeegee before moisture gets underneath. Left alone, the same lifted edge allows water and grit in, and within a few months the problem spreads across the whole panel.

Curtainsider-Specific Considerations

Curtainsider curtains present particular challenges because the substrate is flexible rather than rigid. Every time the curtains are opened, closed, tensioned or slackened, the graphics flex with them. Printed films on curtains are more prone to cracking along fold lines than graphics on rigid panels. A few steps reduce this:

  • Keep curtain tension correctly adjusted at all times. Over-tensioned curtains put more stress on the graphics every time they move.
  • Avoid loading patterns that force the curtains to bulge outward beyond their normal profile - stretched curtains stress the film at the fold points.
  • When the curtains are rolled back for loading, do not leave them rolled and bungeed for extended periods in strong sunlight. UV exposure is concentrated on the folded sections and leads to cracking there first.

What to Do When Minor Damage Happens

Minor scuffs, small tears and lifted corners are almost inevitable on a working HGV over a multi-year period. The temptation is to leave small damage until the next planned rebrand. This is usually a mistake. A small lifted section left through a winter of wet and frosty conditions will be a large peeling section by spring. Contact us when damage is small and localised - it is far easier and cheaper to address at that stage.

Storing a Vehicle With Graphics

If a vehicle is being stored or taken off the road for an extended period, keep it out of direct sunlight where possible. UV exposure degrades print films over time whether the vehicle is working or standing, and months of static direct sun on a south-facing wall will accelerate fading on darker colour areas. If outdoor storage is unavoidable, there is nothing practical to apply over the graphics to protect them, but parking in shade or under cover makes a real difference.

Planning the Next Rebrand Cycle

Even with good aftercare, printed HGV graphics have a finite lifespan. Planning the next rebrand before the graphics are visibly tired is better than waiting until the fleet looks worn. We hold the artwork and colour profiles for every vehicle we fit, so a future rebrand does not start from scratch. When the time comes, call us and we will come to you in Trumpington to assess the vehicles and advise on the best timing for each one.

Removal When the Time Comes

We also offer graphics removal, which matters for aftercare planning. Removing graphics cleanly protects the original paintwork underneath and gives the new graphics the best possible surface to bond to. Poor removal leaves adhesive residue and can damage paint, which then shows through any new wrap or printed panel. Plan removal as part of the rebrand project rather than an afterthought.

Talk to Us About Your Fleet in Trumpington

If you have HGV graphics that need a check-over, or you want advice on aftercare for a vehicle we have fitted or one done by another contractor, give us a call. We come to you in Trumpington and the surrounding area. Getting ahead of a problem is always cheaper than dealing with the result of leaving it.

Working with us in Trumpington

  • Design and print both done by us, not sent out.
  • Old lettering or wraps removed first, if needed.
  • Fleet work in Trumpington split into stages.
  • Artwork stored, ready for your next vehicle.

Lorry and HGV Graphics in Trumpington?

Let us know what needs branding and we will send a design and price to look over.

Call Quote