Covering Cambridge and the surrounding area Monday to Friday 9:00am - 5:00pm Get a quote

Lorry and HGV Graphics in Chesterton

Van Wrapping Cambridge designs, prints and fits lorry and HGV graphics for fleet operators in and around Chesterton, working at your premises with in-house print and a full choice of materials and formats.

5.0 from 9 Google reviews Est. 2020 A written quote up front Mock-up on your vehicle type first We bring the fitting to you

Lorry and HGV Graphics: What Are Your Options?

Fleet managers often come to us having been quoted for one thing without fully understanding what else was available. This page sets out the main material and format options for HGV graphics honestly, including where each one works well and where it falls short. The right choice depends on your vehicle type, how hard the trucks work and what you want to spend.

Full Wraps vs Partial Graphics vs Printed Panels

Full vehicle wraps cover every painted surface - cab, body sides, rear doors and sometimes the roof. They give the strongest visual impact and the most consistent brand presence across a fleet. They also cost the most and take the longest to install. For an HGV, a full wrap is a significant day's work per vehicle. If your trucks are your primary marketing tool and they cover a lot of ground, the investment is usually justified.

Partial graphics cover selected areas - most commonly the full side panels of the trailer or body, the rear doors and the cab doors, leaving the rest of the vehicle in its base colour. Done well, partial graphics can look as impactful as a full wrap because those side panels are where the eye goes. They cost less, take less time to fit and are easier to remove cleanly when the time comes.

Printed panels and cut vinyl lettering are the most economical route. Large-format digital prints are applied to the flat body sides, with cut vinyl used for the cab and smaller areas. This works well on box vans and rigid trucks with flat, uninterrupted panels. It is less suited to curtainsiders where rivets and seams break up the surface.

Curtainsiders: Why They Need a Different Approach

Curtainsider trailers are the most common HGV type on UK roads, and they present a specific challenge for graphics. The surface is not a painted metal panel - it is a coated fabric with a series of vertical straps, buckles and tensioning points. Graphics applied to a curtain are either printed directly onto the curtain itself (specialist work, usually done by the curtain manufacturer or repairer) or applied as a printed film across the metal rails and rigid infill panels at the top and bottom of the trailer.

Many operators focus the brand graphics on the top rail, the lower steel skirt and the cab, leaving the curtain itself plain or in a brand colour. This is a practical approach - it avoids the complication of curtain printing and still delivers a professional, branded appearance. If you want full-curtain printed graphics, that is a separate specialist process and not a standard vinyl wrap job.

Box Vans and Rigid Trucks

Flat-sided box vans and rigid trucks are the most straightforward vehicles to graphic. The panels are smooth, the joins are minimal and the film can be applied in large sections without the rivet and seam work that curtainsiders demand. Full side wraps on a box body are achievable in a single day for a clean, durable result.

The main decisions here are around design rather than installation method - how much of the available panel space to use, whether to use a full-bleed photographic or illustrative background, and how to handle the cab and rear doors consistently with the body.

Cast Film vs Calendered Film: An Honest Comparison

This is the material question that matters most on a working HGV, and it is one that cheaper quotes often gloss over.

Cast vinyl film is made by pouring liquid vinyl onto a casting sheet, allowing it to cure and then removing the sheet. The result is a thin, dimensionally stable film with no internal stress. It conforms well around rivets, curves and panel joins, bonds reliably to complex surfaces and holds its dimensions over time without shrinking. It is the correct choice for any HGV application where the surface has irregularities, and for any vehicle expected to carry graphics for more than a couple of years.

Calendered vinyl film is made by rolling vinyl through a series of pressure rollers. It is thicker, less conformable and has a memory - meaning the film wants to return to its original flat state. On a flat, smooth panel this is not necessarily a problem in the short term. On anything with rivets, corrugations or tight curves, calendered film will lift at the edges and tunnel around rivet heads, often within twelve to eighteen months. It is cheaper, and there are applications where it is the right call - short-term promotional graphics, for example - but it is not the right choice for a fleet vehicle that needs to look professional for several years.

When getting quotes, ask specifically which type of film is being proposed. A quote that does not specify is likely defaulting to calendered material.

Print and Lamination

All digitally printed graphics need a protective laminate applied over the print layer. The laminate protects the ink from UV degradation, abrasion and pressure washing, and it determines the final finish - gloss, satin or matt. Without lamination, printed graphics fade significantly within a year or two of outdoor exposure. This is not a matter of opinion - it is how digital print works on vehicles.

Gloss laminate is the most common choice. It makes colours appear saturated and vivid, and it is easy to clean. Matt laminate gives a more premium, contemporary look and reduces glare, which some operators prefer on darker base designs. Satin sits between the two. None of these choices significantly affects durability - it is primarily a visual decision.

We design and print everything in-house. That means the colour profile we use in design is matched to our print output, and we control the lamination choice through to the finished product. There is no external print supplier interpreting our files differently.

Wrap Removal: What to Know

If you are rebranding, returning leased vehicles or selling trucks on, wrap removal is a service we offer. Good removal involves heating the film to release the adhesive, peeling slowly and treating any adhesive residue without damaging the underlying paint. Cold removal - pulling vinyl off without heat - risks paint lifting, especially on older vehicles or where the paint is not in good condition. If a previous installer applied film directly over bare metal or a poor paint finish, removal is riskier and should be discussed before you commit.

Removal on a large HGV is a half-day to full-day job depending on how much film is on the vehicle and how old it is.

Typical Costs for HGV Graphics in the Cambridge Area

Full graphic installation on an HGV in the UK typically ranges from around £1,500 for a partial application on a smaller rigid to £4,000 or more for a large curtainsider or full-wrap box trailer. The variables are vehicle size, panel complexity, the amount of print required and the grade of film used. Expect a cast-film job on a curtainsider to cost more than a calendered-film job on a flat box body - the material costs more and the installation time is longer.

Partial graphics and cab-only applications cost less and are worth considering if you are phasing a rebrand across a larger fleet.

We Come to You

We travel to your depot or site in and around Chesterton and across Cambridgeshire and fit at your premises. There is no need to move your vehicles to a workshop.

To discuss your fleet and get a clear picture of costs and options, call us directly. Tell us your vehicle types, rough dimensions and what you are trying to achieve, and we will give you a straight answer on what is realistic and what it is likely to cost.

Working with us in Chesterton

  • Design and print both done by us, not sent out.
  • Old lettering or wraps removed first, if needed.
  • Fleet work in Chesterton split into stages.
  • Artwork stored, ready for your next vehicle.

Lorry and HGV Graphics in Chesterton?

Let us know what needs branding and we will send a design and price to look over.

Call Quote