Getting a full van wrap fitted in Trumpington is the beginning, not the end - what you do in the weeks and months afterwards makes a real difference to how long it looks good.
A full van wrap covers every visible panel of the vehicle in a single, continuous printed film - sides, bonnet, roof, tailgate, wheel arches, door pillars and all contoured sections. When it is installed correctly, using quality film and proper surface preparation, it protects the original paintwork underneath and delivers a consistent, professional appearance across the whole vehicle.
We design and print in-house at our Cambridge base and carry out all installations at your premises or chosen location in Trumpington or the surrounding area. Everything from the design file to the finished film comes from us, so we have full control over what goes on your van.
The practical life of that wrap, though, depends significantly on how the vehicle is used and looked after once we have packed up and left.
Freshly applied film needs time to cure and for the adhesive to bond fully to the panels. In the first 48 to 72 hours after installation, there are a few things worth avoiding. Do not put the van through a machine car wash of any kind during this period - the brushes and high-pressure jets can disturb edges before they have fully set. Avoid heavy rain where possible, though a light shower on a completed installation is not a disaster. Do not apply any wax, polish or sealant to the wrap during the curing period.
After the initial cure time, the film is robust enough for normal use. At that point, your aftercare routine takes over.
This is where most avoidable damage happens. Automatic car washes with rotating brushes are damaging to vehicle wraps. The brushes catch edges - particularly around door handles, mirrors, body creases and panel joins - and can lift them progressively over time. Each pass through a brush wash does a small amount of damage, and over several months it adds up.
Touchless or jet washes are safer but still require some care. Keep the nozzle at a reasonable distance and angle - pointing a jet directly at an edge or seam at close range will work the film loose. Avoid pressure washing the edges of panels at close range.
Hand washing is the best method. Use a clean, soft cloth or sponge, a mild vehicle shampoo that does not contain wax or silicone, and rinse thoroughly with clean water. Dry with a clean microfibre cloth rather than leaving the van to air dry, as water spotting can build up over time and dull the finish. For working vans that spend most of the week on the road, a thorough hand wash once a week and a quick rinse when the van is muddy is a reasonable routine.
Certain products that are perfectly fine on painted bodywork can damage or degrade wrap film. Avoid the following:
For stubborn marks or fuel splashes around the filler cap area, isopropyl alcohol (IPA) on a soft cloth works well on most film types and will not damage the finish when used carefully.
Running a quick visual check of your wrap every few weeks takes less than two minutes and can save a costly repair. What to look for:
If you spot a lifting edge, do not try to glue it back yourself with household adhesive - this will cause more damage than the original lift. Contact us and we will assess whether it needs attention.
Where and how you park has a genuine effect on how long a wrap stays looking good. Prolonged exposure to direct sun will fade any printed film over time - a van parked outside in full sun all day, every day, will show colour shift faster than one that is garaged or parked in the shade during the working day. This is not something to lose sleep over for a working van, but if you have a choice of parking spots, the shaded one is better for the wrap.
Similarly, parking tight against walls or skips increases the risk of edge damage from scrapes. Tradespeople know their own vehicles, but it is worth being aware that the edges of door panels and the lower sill area are the most vulnerable parts of a wrap in day-to-day use.
All wraps have a finite life. When the time comes to rebrand, sell the vehicle or simply refresh the livery, the wrap needs to come off properly. We offer wrap removal as a service. Film removed correctly - with controlled heat and the right technique - comes away cleanly and leaves the original paint in the same condition it was before the wrap went on. Film that is rushed off, or removed without experience, can leave adhesive residue or pull paint from any areas where the underlying finish was already compromised.
Keeping a record of the original condition of your paintwork at the time of wrapping is a sensible habit, particularly if the vehicle is leased. Take photographs of any existing damage before the wrap goes on so there is no ambiguity later.
We carry out full van wrap installations across Trumpington and the surrounding area, working at your premises so there is no need to take the vehicle elsewhere. If you would like to talk through what a full wrap involves - or if you already have a wrap and want advice on a specific problem - call us and we will give you a straight answer.
Also available
We design, print and fit full or partial van wraps in Cambridge, working at your premises so your vehicle never leaves your site.
See detailsWe wrap commercial vehicles of all types in Cambridge, designing and printing everything in-house and fitting at your site.
See detailsWe brand entire fleets of commercial vehicles in Cambridge with consistent, professionally printed graphics, designing and fitting everything…
See detailsLet us know what needs branding and we will send a design and price to look over.