If you're a tradesperson or small business owner in St Ives looking to get your van sign-written, knowing what to ask before you agree to anything will save you money, hassle and a finish that falls short.
Van graphics go further than plain cut lettering. They combine printed colour panels, images, logos and text to give your vehicle a visual identity that people remember. A well-designed set of van graphics turns your vehicle into a moving advert every time you park on a job or drive through St Ives town centre.
The process involves designing the artwork, printing it onto specialist vinyl film, preparing your van's paintwork and then fitting the panels precisely so edges sit flush, corners wrap cleanly and nothing lifts. Done properly, the result looks sharp from across a car park. Done poorly, you'll see bubbles, misaligned panels and peeling edges within weeks.
Van graphics are not all produced the same way. Some outfits send your artwork to a third-party printer, then fit panels they've never seen before it arrives on the day. That creates problems with colour accuracy, panel sizing and consistency. We design and print in-house, which means we control every stage - artwork, output and fit - before we ever arrive at your vehicle.
Ask any contractor you speak to whether they carry insurance and whether the work is done by the people you're dealing with, or sub-contracted.
Before you sign off on a quote from any van graphics provider - us or anyone else - run through these questions. The answers will tell you a great deal about what you're actually buying.
Van graphics pricing varies considerably depending on how much of the vehicle is covered, the complexity of the design and the grade of materials used. Partial graphics - covering the rear doors and both sides, for example - are cheaper than a full-vehicle treatment. As a rough guide, partial van graphics for a standard panel van start from around £300-£500. A full wrap with complex printed graphics can reach £1,500-£2,500 or more depending on the vehicle size.
The cheapest quote is not always the best value. A poorly fitted panel will lift, particularly around wing mirrors, door handles and body curves. Once lifted, moisture gets underneath and the adhesive breaks down. You end up paying twice - for the removal and for a replacement job done properly.
A common mistake is trying to put too much information on the van. Your phone number, your trade and your company name are the essential elements. A website address is worth including if it's short and readable at a distance. Beyond that, every additional line of text competes with the rest and reduces the impact of the whole design.
Colour contrast matters more than most people expect. Dark text on a dark van background is unreadable from more than a few metres away. High-contrast combinations - white or yellow on dark blue or black, for example - are legible at speed. We'll work through this with you at the design stage and show you how the finished result looks before anything is committed to print.
Images and logos need to be supplied at high resolution. A logo that looks fine on a business card will appear blurred when scaled up to cover a van door. If you don't have high-resolution artwork, ask us about recreating your logo as a vector file that scales cleanly to any size.
We come to you in St Ives, so you don't need to arrange transport to a workshop. On the day of fitting, the van needs to be clean and dry - ideally parked in a sheltered spot out of direct sunlight and away from wind. Cold panels (below around 10°C) make vinyl harder to work with, so fitting in a garage or under cover is preferable in colder months.
Panel preparation is part of the job. We clean and degrease the surface before anything is applied, because adhesive won't bond properly to a surface with traffic film, polish or silicone residue on it. Any contractor who skips this step is cutting corners.
Once the panels are on, edges are heat-formed around curves and door shuts to ensure a clean, durable finish. The van is then ready to use - though we advise leaving it for a short settling period before washing.
If your van is leased, or you plan to sell it in a few years, it's worth thinking about removal before you commit to the design. We offer van graphic and wrap removal as a separate service. When graphics are applied and removed correctly, the original paintwork underneath should come back clean. If a previous fitter used the wrong materials or over-stretched the film, removal can be more involved.
Tell us upfront if the van is leased or if you have a planned end date in mind. That shapes decisions about how the panels are applied and what materials make most sense.
If you're ready to move forward - or just want to understand what your options are before you decide - call us to talk through what you need. We'll ask about your van, your business and what you want the graphics to achieve, then come back to you with a design concept and a clear price.
Also available
We design, print and fit full or partial van wraps in Cambridge, working at your premises so your vehicle never leaves your site.
See detailsWe wrap commercial vehicles of all types in Cambridge, designing and printing everything in-house and fitting at your site.
See detailsWe brand entire fleets of commercial vehicles in Cambridge with consistent, professionally printed graphics, designing and fitting everything…
See detailsLet us know what needs branding and we will send a design and price to look over.